Communications - Scientific Letters of the University of Zilina 2000, 2(1):4-9 | DOI: 10.26552/com.C.2000.1.4-9

Product Modelling for AAC/CAPP Integration

Janusz Pobożniak1
1 Institute of Production Engineering and Automation, Cracow University of Technology, Poland

The key condition for achieving the full automation is the integration of CAD/CAPP/CAM systems. The important element in the development of computer aided production preparation system is product modelling. The most widely known modelling method is feature based modelling. The mentioned method is very promising because it can extensively use the geometric model created in CA system. The enhancement of product information exchange between systems working in CE environment can increase the level of computer automation. The proposed system architecture fulfilling the requirements is presented in the article.

Keywords: no keywords

Published: March 31, 2000  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Pobożniak, J. (2000). Product Modelling for AAC/CAPP Integration. Communications - Scientific Letters of the University of Zilina, 2(1), 4-9. doi: 10.26552/com.C.2000.1.4-9
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. ACIS, Save file format manual, Spatial Technology, Inc., 1996
    2. BRADLEY, H. D., MAROPOULOS, P. G.: Concurrent Engineering support system for the assesment of manufacturing options at early design stages, AMPST'96 Conference, Bradford 1996 Go to original source...
    3. CAM-I 90, Proceedings features symposium, CAM-I, report no. P-90-PM-02, Boston, 1990
    4. CHANG, T. C.: Expert process planning for manufacturing, Addison-Wesley Publishing Company, Inc. 1990
    5. ELMARAGHY, H., et i inni: Evolution and future perspectives of CAPP, Annals of the CIRP, Vol. 42/1/1993 Go to original source...
    6. HERMAN A.H., LAWLEY M.L., LU, C.-Y., MATTOX, D.: An opportunistic Approach to process planning within Concurrent Engineering Enivronment, Annals of the CIRP, Vol. 42/1/1993 Go to original source...
    7. ISO 10303-11, Product Data Representation and Exchange. Part 1: Overwiew and fundamental principles
    8. ISO 10303-11, Product Data Representation and Exchange. Part 11: The EXPRESS Language reference Manual
    9. KALTA, M., DAVIS, B. J.: Converting 80-character ASCII IGES sequential files into more conviniently accessible direct-access files, Int J Advanced Manufacturing Technologies, vol. 8, 1993 Go to original source...
    10. KALTA, M., DAVIS, B. J.: Guidelines for building 2D CAD models of turned components in CAD-CAPP integration, Int J Advanced Manufacturing Technologies, vol. 8, 1993 Go to original source...
    11. KARACALI, O., BELL, R.: "Concurrent design expert" application with "CAE" driven information model, MATADOR Conference, 1996 Go to original source...
    12. KOCH, T.: Zarzadzanie jakoscia - czesc 3: Metody i techniki zapewnienia jakosci, Instytut Technologii Maszyn i Automatyzacji Politechniki Wroclawskiej
    13. LIU, T. H., FISCHER, W.: Developing feature-based manufacturing applications using PDES/STEP, Concurrent engineering: Research and Applications, vol 1, 1993 Go to original source...
    14. POBOŻNIAK, J.: Przeglad metod modelowania przedmiotów, Seminarium "Systemy CAPP", Politechnika Krakowska 1996
    15. POBOŻNIAK J., Przeglad metod rozpoznawania cech, Seminarium Naukowe ITMiAP, Politechnika Krakowska 1997
    16. PRATT, M. J.: Synthesis of an optimal approach to form feature modelling, Proc. of the Int. Symposium on Advanced Geometric Modelling for Engineering Appliacations, Berlin 1989
    17. SANTOCHI, M., GIUSTI, F.: An approach to CAD-CAM integration: development of an interface for the Euclid, 1986
    18. SAMEK, A.: Projektowanie procesów technologicznych obróbki skrawaniem i montazu, Skrypt dla studentów wyzszych szkol technicznych, Krakow 1986
    19. SEMAKULA, M. E., SATSANG, A.: Application of PDES to CAD/CAPP integration, Computers in Industrial Engineering, vol. 18, No. 4, 1990 Go to original source...
    20. TÖNSHOFF, H. K., AURICH, J. CH., BAUM, T., HAMELMANN, S.: A Workpiece model for CAD/CAPP applications, Production Engineering vol. I/2 (1994)
    21. TÖNSHOFF. H. K., AURICH, J. CH., BAUM, T.: Configurable feature-based CAD/CAPP System, Proceedings of the IFIP International Conference

    This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content