Communications - Scientific Letters of the University of Zilina 2006, 8(2):70-74 | DOI: 10.26552/com.C.2006.2.70-74
Cooling Working Rolls of the Finishing Section of Wide-Strip Hot Rolling Mills
- 1 Faculty of Mechanical Engineering, Technical University in Kosice, Slovak Republic
- 2 Faculty of Environmental and Manufacturing Technology, Technical University in Zvolen, Slovak Republic
The contribution deals with heat nucleation in rolling on the hot wide strip mill as well as into following transfer to the rolls without friction heat being involved. This work has resulted in the computer program owned by author. It represents the most accessible computer technique and the dependence of the accepted heat amount on the revolutions and angle of bite, as well as the dependence on the temperature of the roll surface which may participate in the initiation and widening of the surface friction coefficient and roll stand sequence.
Keywords: cooling working rolls, finishing section, wide strip, hot rolling mills
Published: June 30, 2006 Show citation
| ACS | AIP | APA | ASA | Harvard | Chicago | Chicago Notes | IEEE | ISO690 | MLA | NLM | Turabian | Vancouver |
References
- ÈI®MÁR, J., HORBAJ, P.: Cooling working rolls of the finishing section of wide-strip hot rolling mills (in Slovak), Hutnícke listy, 54/1990, No. 9, pp. 639-644
- NOVÁK, J., PAVLENKO, S.: Automation of pipeline energetics systems component manufacturing. In: Automation 2001, Warszawa, Poland, March 2001, pp. 75-82
- SHICKOV, A. N.: Temperature conditions in sheet rolling rolls (in Russian), Verlag Leningrad University, Leningrad, 1974
- RAUDENSKÝ, M.: Simulation of thermal processes in products of hot rolling (in Czech), Hutnícke listy, 52/1988, No. 9, pp. 623-626
- OSAMU, K. et. al.: Relation between Calculated Surface Temperature and Deteration of Hot Strip Work Rolls, Transaction of the Iron and Steel Institute of Japan, No. 12, 1980
- Cooling Water Volume of Hot Strip Mill Finishing Stands. Report on Hot Strip Mills in the USSR and other industrial countries, VS® a.s., Steelworks, Ko¹ice, 1987
- ANDREJÈÁK, I., MOLNÁR, V.: Technology of pressurized casting (in Slovak), ES FVT Pre¹ov, pp. 71, ISBN 80-7099-419-3
- KIZEK, J., LAZIÈ, L.: Simulation method for optimization of a mixture of fuel gases. Metalurgija, 38/1999, No. 2, pp. 109-113
- VÍGLASKÝ, J.: Technical-economic evaluations of solar air collector application at a sawn timber kiln (in Slovak), TU Zvolen, Report No. 02-522-804/3, 1989, p. 53.
- RU®INSKÁ, E.: The modificated Black Liquors for Preparation of perspective Wood-based Composite Materials. Proceedings from 7th International Scientific Conference "CO-MAT-TECH". STU MTF in Trnava, 1999, pp. 170-175.
- RU®INSKÁ,E.: A Perspective Wood-based Composite Materials. Part I.: Study of Preparation and Evaluation of Selected Properties of Adhesive Mixtures. Proceeding from 4th International Scientific Conference "Wood and Fire Safety". ©trpské Pleso - Patria, 2000, pp. 297-304.
- RU®INSKÁ, E.: Effective Utilization of Kraft Black Liquors for Wood-based Composite Materials. Proceedings from 13th International Conference "Pulp & Paper 2002". Brno, 2002, CD, 6 p.
- RU®INSKÁ, E.: Thermal characteristics of Modified Kraft Black Liquors and Sulphate Lignins. Part I. Thermogravimetry (TG, DTG). Proceedings from international conference "Fire Engineering 2002". Luèenec, Hotel Reduta, 2002, pp. 337-340.
This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.