Communications - Scientific Letters of the University of Zilina 2007, 9(4):25-29 | DOI: 10.26552/com.C.2007.4.25-29
Modelling the Ultrasonic Diagnosis of Adhesive Bonds
- 1 Poznan University of Technology, Institute of Working Machines and Motor Vehicles, Poland
In the paper, the conception of modelling the diagnosis of adhesive bonds by ultrasonic method is presented. Two complementary models of bonds diagnosis are presented and discussed. The models proposed reduce an evaluation of coating adherence to assessment of condition of bond between coating and substrate. The models are connected with period of production of adhesive bonds (so called control diagnostic) and with the operational or maintenance period of its existence (operational diagnostic).
Keywords: no keywords
Published: December 31, 2007 Show citation
References
- JOSKO M.: An Ultrasonic Assessment of Adhesive Bonds between Coating and Substrate, Proceedings of the Conference Transcom 97, University of Zilina, 1997, Vol. 3, pp. 261-264.
- JOSKO M.: Correlation between an Ultrasonic Signal and Adhesive Strength (in Polish), Proceedings of 28th Polish Conference of Nondestructive Testing, Warsaw, 1999, pp. 103-106.
- JOSKO M.: Methodological Aspects of Evaluation of Regenerative Coatings Adherence Using an Ultrasonic Method (in Polish), PP Poznan, 2002.
- JOSKO M.: Investigation of the Degradation of Joints by Ultrasonic Method, Proceedings of the Conference Transcom-99, University of Zilina, 1999, Section 6, pp. 47-50.
- ZOLTOWSKI B.: A Basis of Technical Diagnostics (in Polish), ATR, Bydgoszcz, 1996.
- CEMPEL C.: Data Reduction in Machine Diagnosis (in Polish), Zagadnienia Eksploatacji Maszyn (Polish Journal), 1980 Vol. 15, No. 4, pp. 571-585.
- TOMASZEWSKI F.: Determination of Technical Condition of Complex Technical Object (in Polish), PP, Poznan, 1998.
This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.

