Communications - Scientific Letters of the University of Zilina 2014, 16(11):96-100 | DOI: 10.26552/com.C.2014.3A.96-100

Machinability of Nano-Structured Biomaterials for Dental Implants

Dana Stancekova1, Jan Semcer1, Jozef Holubjak1, Mario Drbul1
1 Department of Applied Mechanics, Faculty of Mechanical Engineering, University of Zilina, Slovakia

High quality materials are characterized by increased wear resistance, high strength and hardness, abrasive wear resistance, heat and creep resistance. Due to these properties some materials are considered as hard to machine. This group of materials includes biocompatible materials used for manufacturing implants from commercially pure titanium TiGr2, TiGr5, nano-structured commercially pure titanium nTi and volume-formed titanium alloy TiNbTa. Materials were tested by milling operations with different cutting parameters and force of cutting monitoring.

Keywords: biocompatible material, nano-structured titanium, machining

Published: October 31, 2014  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Stancekova, D., Semcer, J., Holubjak, J., & Drbul, M. (2014). Machinability of Nano-Structured Biomaterials for Dental Implants. Communications - Scientific Letters of the University of Zilina, 16(3A), 96-100. doi: 10.26552/com.C.2014.3A.96-100
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. CZAN, A., STANCEKOVA, D., MRAZOVA, M., SEMCER, J.: Conditions of Hardmachining Materials Machinability usable in Biomedicine, Intern. working conference: Total Quality Management - Advanced and Intelli-Genapproaches, with Second Special Conference: Manufuture in Serbia 2011, ISBN 978-86-7083-727-0
    2. SEMCER, J., MRAZOVA, M., PILC, J.: Biocompatible Materials and their Ways of Machinin, Technological Engineering, 2010, 45-46, ISSN 1336-5967
    3. TVRDON, M. et al.: Prosthetic Stomatologia (in Slovak), Bratislava : Svornost, 2006, 581 p., ISBN 80-969524-4-7
    4. SELINGEROVA, S.: Development of dental implants (in Czech), Bachelor thesis, VUT Brno : Fakulta strojniho inzenyrstvi : Ustav mechaniky telies mechatroniky a biomechaniky, 2009
    5. SIMUNEK, A. et al.: Dental Implantolog (in Czech), Hradec Kralove: Stomatologicka klinika FN a LFUK, 2008, 296 p., ISBN 978-80-87009-30-9
    6. CZAN, A., TILLOVA, E., SEMCER, J., PILC, J.: Surface and Subsurface Residual Stresses after Machining and their Analysis by x-ray Diffraction, Communications - Scientific Letters of the University of Zilina, No. 2, 69-76, 2013, ISSN 1335-4205 Go to original source...
    7. CEP, R., JANASEK A., PETRU J., CEPOVA L., CZAN A., VALICEK J.: Hard Machinable Machining of Cobalt-based Superalloy, Manufacturing Technology, XIII/13, 2013, 226-231, UJEP : Usti n. Labem, ISSN 1213-2489 Go to original source...
    8. NAPRSTKOVA, N., HOLESOVSKY, F.: Admeasurement of Grinding Wheel Loss at FPTM, 24th intern. colloquium Advanced manufacturing and repair technologies in vehicle industry, 2007, 159-164, ISBN 978-80-7194-962-6.
    9. HOLESOVSKY, F., NAPRSTKOVA, N., NOVAK, M.: GICS for Grinding Process Optimization. Manufacturing Technology, XII/12, 2012, 22-26, UJEP: Usti n. Labem, ISSN 1213-2489. Go to original source...
    10. SKUBLOVA, L., SKORIK, V., MRAZIKOVA, R., HADZIMA, B: Corrosion Resistance of Ti6al4v Titanium Alloy with Modified Surfaces. Communications - Scientific Letters of the University of Zilina, No. 4, 2010, 80-84, ISSN 1335-4205 Go to original source...
    11. CEP, R., JANASEK, A., CEPOVA, L., PETRU, J., HLAVATY, I., CAR, Z., HATALA, M.: Experimental Testing of Exchangeable Cutting Inserts Cutting Ability. Tehnicki Vjesnik, 20 (1), 2013, 21-26, ISSN: 1330-3651
    12. NOVAKOVA, J., PETRKOVSKA, L., BRYCHTA, J., STANCEKOVA, D.: Influence of Cutting Parameters on Integrity Surface at High Speed Cutting. Transactions of the VSB - Technical University of Ostrava. Mechanical Series, vol. LV, No. 1, 2009, 203-209, Ostrava: VSB - TUO
    13. SAPIETOVA, A., SAGA, M., NOVAK, P.: Multi-software Platform for Solving of Multibody Systems Synthesis, Communications - Scientific Letters of the University of Zilina, vol. 14, No. 3, 43-48, 2012, ISSN 1335-4205 Go to original source...
    14. LITVAJ, I., PONISCIAKOVA, O., STANCEKOVA, D., DRBUL, M.: Knowledge Processes and their Implementation in Small Transport Companies, 17th intern. conference Transport Means 2013, Kaunas, October 2013, Code 102486, 153-156, ISSN: 1822-296X
    15. CZAN, A., SAJGALIK, M., HOLUBJAK, J., KOURIL, K.: Studying of Cutting Zone when Finishing Titanium Alloy by Application of Multifunction Measuring System, Manufacturing Technology, vol. 13, No. 4, December 2013, 428-431, ISSN: 1213-2489 Go to original source...
    16. PILC, J., MICIETOVA, A., SALAJ, J., CILLIKOVA, M.: The Influence of the Selected Aspects in Planing Operations by using Auto-rotation Tool, Transactions of Famena, vol. 29, No. 2, 2005, 55-60, ISSN: 1333-1124
    17. VASILKO, K., PILC, J.: New Technological Knowledge of the Rotary Turning Tool, J. Manufacturing Technology, vol. 13, No. 4, December 2013, 571-575, ISSN: 1213-2489 Go to original source...
    18. KRAJCOVIC, M., BULEJ, V., SAPIETOVA, A., KURIC, I.: Intelligent Manufacturing Systems in Concept of Digital Factory. Communications - Scientific Letters of the University of Zilina, No. 2, 2012, ISSN 1335-4205 Go to original source...
    19. CUBONOVA, N.: Post-processing of CL Data in CAD/CAM System Edgecam using the Constructor of Post-processors, Manufacturing Technology : J. for Science, Research and Production, vol. 13, No. 2, 2013, 158-164, ISSN 1213-2489. Go to original source...

    This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content