Communications - Scientific Letters of the University of Zilina 2014, 16(11):154-160 | DOI: 10.26552/com.C.2014.3A.154-160
The Calculation of Inverse Kinematics for 6DOF Serial Robot
- 1 Department of Automation and Production Systems, Faculty of Mechanical Engineering, University of Zilina, Slovakia
This article deals with the inverse kinematic model of robot devices which was implemented into the simulation software RoboSim designed at the Department of Automation and Production Systems - Faculty of Mechanical Engineering, University of Zilina. Concretely there is shown the technique how to develop the system of equations for serial kinematic mechanism with 6 degrees of freedom (DOFs). Further this software can be used as universal platform for simulation of mechanisms with serial, parallel as well as hybrid kinematic structure. This flexibility can be considered as a main advantage of the software RoboSim. Its specific feature is that there are used two different methods for calculation of inverse kinematics: heuristic and vector method as well. The versatility, openness and access to the source code create the predisposition for its deployment under the laboratory conditions for controlling of robotic devices developed in authors' workplace within the last few years.
Keywords: vector method, robot inverse kinematics, matrix equations
Published: October 31, 2014 Show citation
| ACS | AIP | APA | ASA | Harvard | Chicago | Chicago Notes | IEEE | ISO690 | MLA | NLM | Turabian | Vancouver |
References
- SKARUPA, J., MOSTYN, B.: Theory of Industrial Robots (in Czech). Vienala : Kosice, 2000, ISBN 80-88922-35-6, p. 146
- LUNG-WEN, T: Robot Analysis: The Mechanics of Serial and Parallel Manipulators. Interscience, 1999, 520 p., ISBN 04-7132-593-7.
- POPPEOVA, V., et al: Design of Anti-collision System for Robotics. Intern. Proc. of Computer Science and Information Technology: Mechanical Engineering, Robotics and Aerospace - ICMERA 2011, Singapore: IACSIT Press, editor: Jiang Xiaolan, vol. 4, 298-302, ISSN 2010-460X.
- BULEJ, V., POPPEOVA, V., et al: Actual State of Development in Field of Parallel Kinematic Structures and Mobile Robots at the Department of Automation and Production Systems in Zilina (in Slovak). Technological forum 2011, 93-101, Praha, ISBN 978-80-01-04852-8.
- BULEJ, V., STOIANOVICI, G.-V., POPPEOVA, V.: Material Flow Improvement in Automated Assembly Lines Using Lean Logistics. Annals of DAAAM for 2011 & Proc. of 22nd intern. DAAAM Symposium, Vienna : DAAAM International, 2011, editor: B. Katalinic, vol. 22, No. 1, 253-254, ISSN 1726-9679.
Go to original source... - KURIC, I.: New Methods and Trends in Product Development and Process Planning. Academic J. of Manufacturing Engineering. Editura Politehnica: Scientific Papers, vol. 9, No. 1, 2011, Cluj-Napoca, 83-88. ISSN 1583-7904
- SAGA M., HANDRIK M., KOPAS P.: Contribution to Computer Simulation of Induction Bending of Large Diameter Pipes. Metalurgija (Metallurgy), vol. 49, No. 2, 2010, 498-502, ISSN 0543-5846.
- SAPIETOVA, A., SAGA, M., NOVAK, P.: Multi-software Platform for Solving of Multibody Systems Synthesis. Communications - Scientific Letters of the University of Zilina, vol. 14, No. 3, 2012, Zilina, pp. 43-48, ISSN 1335-4205. Go to original source...
This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.