Communications - Scientific Letters of the University of Zilina 2019, 21(3):35-39 | DOI: 10.26552/com.C.2019.3.35-39

Dynamic Strength and Anisotropy of Dmls Manufactured Maraging Steel

Eva Schmidova1, Premysl Hojka1, Bohumil Culek1, Filip Klejch1, Michal Schmid1
1 Faculty of Transport Engineering, University of Pardubice, Czech Republic

This paper deals with maraging steel, as a prospective material for the 3D printed lightened structural parts of transport means. Direct Metal Laser Sintering technology was tested for creation of a thin-wall structure with defined internal geometry. The referential samples prepared by the DMLS technology were examined under quasi-static and high strain rate loading using a servo-hydraulic testing machine at strain rates up to 1400 s-1. Microstructural analyses served for evaluation of structural homogeneity and metallurgy quality, including the influence of crystallization gradient. The stabile ductile fracture mode was proven by fractography analyses, even at a maximal strain rate. The post-impact tests were conducted to evaluate the local residual plasticity by indentation tests.

Keywords: DMLS technology; 3D printing; maraging steel; impact tensile tests

Received: March 21, 2019; Accepted: May 2, 2019; Published: August 15, 2019  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Schmidova, E., Hojka, P., Culek, B., Klejch, F., & Schmid, M. (2019). Dynamic Strength and Anisotropy of Dmls Manufactured Maraging Steel. Communications - Scientific Letters of the University of Zilina, 21(3), 35-39. doi: 10.26552/com.C.2019.3.35-39
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. BUCHANAN, C., GARDNER, L. Metal 3D printing in construction: A review of methods, research, applications, opportunities and challenges. Engineering Structures [online]. 2019, 180, p. 332-348. ISSN 0141-0296, eISSN 1873-7323. Available from: https://doi.org/10.1016/j.engstruct.2018.11.045 Go to original source...
    2. MURR, L. E., JOHNSON, W. L. 3D metal droplet printing development and advanced materials additive manufacturing. Journal of Materials Research and Technology [online]. 2017, 6(1), p. 77-89. ISSN 2238-7854. Available from: https://doi.org/10.1016/j.jmrt.2016.11.002 Go to original source...
    3. THOMAS, T., MAHFUZ, H., CARLSSON, L.A., KANNY, K., JEELANI, S. Dynamic compression of cellular cores: temperature and strain rate effects. Composite Structures [online]. 2002, 58(4), p. 505-512. ISSN 0263-8223, eISSN 1879-1085. Available from: https://doi.org/10.1016/S0263-8223(02)00159-9 Go to original source...
    4. DANNEMANN, K. A., LANKFORD, J. High strain rate compression of closed-cell aluminum foam. Materials Science and Engineering: A [online]. 2000, 293(1-2), p. 157-64. ISSN 0921-5093. Available from: https://doi.org/10.1016/S0921-5093(00)01219-3 Go to original source...
    5. DUDA, T., RAGHAVAN, L. V. 3D metal printing technology. IFAC-PapersOnLine [online]. 2016, 49(29), 2016, p. 103-110. ISSN 2405-8963. Available from: https://doi.org/10.1016/j.ifacol.2016.11.111 Go to original source...
    6. BHAVAR, V., KATTIRE, P., PATIL, V., KHOT, S., GUJAR, K. SINGH, R. A Review on powder bed fusion technology of metal additive manufacturing. 4th International Conference and Exhibition on Additive Manufacturing Technologies AM 2014: proceedings. Additive Manufacturing Society of India (AMSI), 2014.
    7. SUREL, A. Direct metal laser-sintering (DMLS). Avec l'EOSINT M 270. Eighteenth International Conference & Exhibition Moulding 2008 : proceedings. 2008.
    8. MOONEY, B., KOUROUSIS, K. I., RAGHAVENDRA, R. Plastic anisotropy of additively manufactured maraging steel: influence of the build orientation and heat treatments. Additive Manufacturing [online]. 2019, 25, p. 19-31. ISSN 2214-8604, eISSN 2214-7810. Available from: https://doi.org/10.1016/j.addma.2018.10.032 Go to original source...
    9. SUN, Y., LI, Q. M. Dynamic compressive behavior of cellular materials: A review of phenomenon, mechanism and modelling. International Journal of Impact Engineering [online]. 2018, 12, p. 74-115. ISSN 0734-743X. Available from: https://doi.org/10.1016/j.ijimpeng.2017.10.006 Go to original source...
    10. SHA, W., GUO, Z. Maraging steels, modelling of microstructure, properties and applications, Cambridge UK: Woodhead Publishing, 2009. ISBN 978-1-84569-686-3. Go to original source...
    11. BOWMAN, K. J. Mechanical behavior of materials. Hoboken, NJ: John Wiley, 2004. ISBN 978-0-471-24198-0.

    This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content