Laboratory Tests of the Control of the Child Seats using Method for the Vibration Comfort of Children Transported in Them

https://doi.org/10.26552/com.C.2021.3.B187-B199

Keywords: vehicle safety, vibrations, child seat, vibrating comfort

Abstract

The article presents results of the laboratory studies of the impact of the child seats mounting method on the vibration comfort of children transported in them. The tested child seats were mounted forward facing the rear seat of a passenger car. The A seat was fastened with the ISOFIX base, while the B seat was fastened with standard car seat belts. During the tests, values of the vertical vibrations were measured on the seat of the child seat, the rear seat of the vehicle and the ISOFIX base. It was noted that the analyzed system, may be characterized by two different vibration transmission chains, which depend on the child seat mounting system (classic seat mounting system and ISOFIX system). These studies show the negative impact of using the ISOFIX base, which is confirmed by the Root Mean Square (RMS) values and the Vibration Dose Value (VDV), determined for the "A" seat secured with the ISOFIX base that were higher than the RMS and VDV for the "B" classic mounted seat.

Author Biographies

Damian Frej

Department of Automotive Engineering and Transport, Kielce University of Technology, Kielce, Poland

Andrzej Zuska

Department of Automotive Engineering and Transport, Kielce University of Technology, Kielce, Poland

Emilia Szumska

Department of Automotive Engineering and Transport, Kielce University of Technology, Kielce, Poland

Published
2021-07-01
How to Cite
Damian Frej, Andrzej Zuska, & Emilia Szumska. (2021). Laboratory Tests of the Control of the Child Seats using Method for the Vibration Comfort of Children Transported in Them. Communications - Scientific Letters of the University of Zilina, 23(3), B187-B199. https://doi.org/10.26552/com.C.2021.3.B187-B199
Section
Mechanical Engineering in Transport