Communications - Scientific Letters of the University of Zilina 2009, 11(1):55-59 | DOI: 10.26552/com.C.2009.1.55-59

The DFM Control System Based on PLL

Andrzej Popenda1
1 Institute of Industrial Electrical Engineering, Faculty of Electrical Engineering, Technical University of Czestochowa, Poland

A specific structure of control system with double fed machine (DFM) is studied in the paper. The DFM is assumed to be a generator with stator winding connected to the power grid and it produces active and reactive powers. A command vector controlling DFM is transformed to the rotor-oriented coordinate system using angle of transformation. The angle of transformation is estimated in the system by applying a phase locked loop (PLL).Moreover, an example of application of pulse phase locked loop for estimation of voltage vector components is presented in the paper. In conclusion the properties of proposed PLL-based control systems are compared with properties of systems known from radio engineering and telecommunications described in the first chapter of the paper.

Keywords: no keywords

Published: March 31, 2009  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Popenda, A. (2009). The DFM Control System Based on PLL. Communications - Scientific Letters of the University of Zilina, 11(1), 55-59. doi: 10.26552/com.C.2009.1.55-59
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. POPENDA, A.: Decoupling control of doubly fed induction machine without rotor position measurement, Proc. of Conf. PCIM'95, Nuremberg, 1995, pp. 561-571.
    2. POPENDA, A.: Control of double fed asynchronous machine using digital signal processor, Proc. of Conf. EDPE'99, High Tatras, 1999.
    3. TIETZE, U., SCHENK, CH.: Semiconductor Control Systems (in Polish), Warszawa WNT, 1997.
    4. KUDREWICZ, J.: Phasing loops dynamics (in Polish), Warszawa WNT, 1991.
    5. BOGALECKA, E.: Control problems with double-fed machine operating as a generator in electric power system (in Polish), Prace Naukowe Wyzszej Szkoly Morskiej w Gdyni, Gdynia, 1997.
    6. RUSEK, A., POPENDA, A.: Transient states of polymerizer drive including real load of specially designed induction motor, Proc. of Conf. on Electrical Machines (ICEM), Crete Island, 2006.
    7. RUSEK, A.: The mathematical model and selected transient states of polymerization reactor drive supplied with frequency converter, IVth Int. Sc. Symp. Elektroenergetika 2007, 19.-21. 9. 2007, Stara Lesna, in press.
    8. POPENDA, A., RUSEK, A.: The impact of magnetic circuit saturation on properties of specially designed induction motor for polymerization reactor, ISEF 2007 - XIII Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, Prague, 2007, in press.
    9. POPENDA. A., RUSEK. A.: Mathematical model and selected transients states of main drive for polimerization reactor taking into consideration operating parameters of mixer chamber (in Polish), VI Sc. Symp. PTETiS "Wybrane Zagadnienie Elektrotechniki i Elektroniki (Selected Problems of Electrical and Electronic Engineering) WZEE'2006", Lublin - Kazimierz Dolny, 2006, pp. 220-229.
    10. POPLAWSKI, T.: Application of the Takagi-Sugeno (TS) fuzzy logic model for load curves prediction in the local power system, IIIrd Scientific Symposium Elektroenergetika 2005, Stara Lesna, 2005.

    This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content