Communications - Scientific Letters of the University of Zilina 2012, 14(11):36-41 | DOI: 10.26552/com.C.2012.4A.36-41
Optimization of Construction Parameters of a Floor Convector
- 1 Department of Energy Technology, Faculty of Mechanical Engineering, University of Zilina, Slovakia
The paper deals with optimization of construction parameters of a floor convector with natural convection. Intensification of heat transfer from the floor convector with an objective to achieve the highest possible thermal performance of the floor convector was performed by CFD method and criterion equations at boundary conditions, like ambient temperature 20ºC and the temperature of the heating medium 75/65°C in thermostatic chamber.
Keywords: floor convector with natural convection, rib, spacing
Published: December 31, 2012 Show citation
ACS | AIP | APA | ASA | Harvard | Chicago | Chicago Notes | IEEE | ISO690 | MLA | NLM | Turabian | Vancouver |
References
- KAPJOR, A.: Optimization of Construction Parameters of Passive Floor Convectors. Dissertation thesis. Zilina 2009
- REMSBURG, R.: Thermal Design of Electronic Equipment. Boca Raton : CRC Press LLC, 2001
- FRANK, P, INCOPERA, D., DEWIT, P. et al.: Fundamentals of Heat and Mass Transfer, John Wiley & Sons
- DOBAKOVA, R., BRESTOVIC, T.: Calculation of Thermal Loss of Above-Ground and Underground Trenchless Pipe Laying by Means of Program VTSP. Strojarstvo, June 2008, pp. 18-19th Meeting of departments of fluid mechanics and thermomechanics, 2009. Demanovska dolina. ISSN 1335-2938.
- VITAZEK, I.: Thermal Technology and Waterworks - second unchanged edition. Nitra : SPU publishers, 2008, 104 p.
This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.