Communications - Scientific Letters of the University of Zilina 2013, 15(2):77-87 | DOI: 10.26552/com.C.2013.2.77-87

Intelligent Manufacturing Systems in Concept of Digital Factory

Martin Krajcovic1, Vladimir Bulej2, Ivan Kuric2, Alzbeta Sapietova3
1 Department of Industrial Engineering, Faculty of Mechanical Engineering, University of Zilina, Slovakia
2 Department of Automation and Production Systems, Faculty of Mechanical Engineering, University of Zilina, Slovakia
3 Department of Applied Mechanics, Faculty of Mechanical Engineering, University of Zilina, Slovakia

This paper deals with selected areas of concept of Zilina Intelligent Manufacturing System (ZIMS), which is developed by the Faculty of Mechanical Engineering in collaboration with CEIT and other faculties of the University of Zilina. Main research areas realized in the framework of ZIMS cover the basic processes in the entire product lifecycle from beginning to end (PLM - Product Lifecycle Management). In this paper two of these areas will be described - manufacturing system design using progressive digital technologies and utilization of automation and robotics in intelligent manufacturing systems.

Keywords: Intelligent Manufacturing Systems, Zilina Intelligent Manufacturing System, robotics, simulation, virtual 3D models, optimization of production systems

Published: June 30, 2013  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Krajcovic, M., Bulej, V., Kuric, I., & Sapietova, A. (2013). Intelligent Manufacturing Systems in Concept of Digital Factory. Communications - Scientific Letters of the University of Zilina, 15(2), 77-87. doi: 10.26552/com.C.2013.2.77-87
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. GREGOR, M., MEDVECKY, S: Application of Digital Engineering and Simulation in the Design of Products and Production Systems. Management and Production Engineering Review, vol. 1, No. 1, pp. 71-84, 2010, ISSN 2080-8208
    2. KURIC, I.: New Methods and Trends in Product Development and Process Planning. In: Academic Journal of Manufacturing Engineering. Editura Politehnica, Scientific Papers, vol. 9, No. 1, 2011, Cluj-Napoca, pp. 83-88. ISSN 1583-7904
    3. HNAT, J.: Virtual Factory Framework. Industrial Engineering Moves the World - InvEnt 2012. Zilina: University of Zilina, 2012. ISBN 978-80-554-0542-1, pp. 56-59, 2012
    4. FURMANN, R., KRAJCOVIC, M.: Modern Approach of 3D Layout Design. In TRANSCOM 2011: 9th European Conference of Young Research and Scientific Workers, Zilina: University of Zilina, 2011, ISBN 978-80-554-0370-0, pp. 43-46
    5. BRUNO, F., CARUSO, F., et al.: Visualization of Industrial Engineering Data in Augmented Reality. J. of Visualization. ISSN 1343-8875, vol. 9, No. 3, pp. 319-329, 2006 Go to original source...
    6. MIRANDOVA, G., GABAJ, I., GRZNAR, P.: Use of Augmented Reality in Visual Management. Industrial Engineering Moves the World - InvEnt. Zilina : University of Zilina, 2012, ISBN 978-80-554-0542-1, pp. 112-115.
    7. ENGINEERLIVE - Robotics: Helping Manufacturers Recover. 2011. [online] 2011, [cit. 2012-12-15]. Available on: http://www.engineerlive.com/Process-Engineer/Plant_Management/Robotics%3A_helping_manufacturers_recover/23205/
    8. FANUC Robotics - The New M1iA. 2009. [online] 2009, [cit. 2012-12-12]. Available on: http://www.fanucrobotics.co.uk/en/countries/fruk/news/the%20new%20m1ia
    9. HAVLAS, P.: Riesenie koliznych stavov v oblasti priemyselnych robotov / Solving of Collision Situations in the Field of Industrial Robots), Dissertation thesis. University of Zilina, 2010, p. 139.
    10. URICEK, J., et al.: Control and Navigation of Mobile Robots in Safety and Fire Protection. Communications - Scientific Letters of the University of Zilina, 2011, vol. 13, No. 2, pp. 118-122, ISSN 1335-4205 Go to original source...
    11. POPPEOVA, V. et al.: Six-Axes Parallel Mechanism and its Application in Design of Machine Tool with Numerical Control. Scientific Reports, J. of the University of Applied Sciences Mittweida - Moderne Automatisierungtechnik / Robotik, Mittweida, 2011, vol. 21, No. 5, pp. 74-77, ISSN 1437-7624
    12. SAGA, M., DUDINSKY, M., PECHAC, P.: Optimization of thin Shell Structures Using FSD Algorithms, Communication - Scientific Letters of the University of Zilina, vol. 14, No. 3, 2012, pp. 32-38, ISSN 1335-4205. Go to original source...
    13. SAPIETOVA, A., SAGA, M., NOVAK, P.: Multi-software Platform for Solving of Multibody Systems Synthesis. Communication - Scientific Letters of the University of Zilina, vol.14, No. 3, 2012, Zilina, pp. 43-48, ISSN 1335-4205. Go to original source...
    14. ARNOLD, M., SCHIENHLEN, W.: Simulation Techniques for Applied Dynamics, CISM Courses and Lectures, vol. 507, Italy : Springer Wien : New York, 2008, 313 p. ISBN 978-3-211-89547-4.
    15. SAGA M., HANDRIK M., KOPAS P.: Contribution to Computer Simulation of Induction Bending of Large Diameter Pipes. In. Metalurgija (Metalurgy) 2010, vol. 49, No. 2, p. 498-502, ISSN 0543-5846.
    16. DE JALLON, J. G., BAYO, E.: Kinematic and Dynamic Simulation of Multibody Systems. The Real-Time Challenge, Springer-Verlag : New York, 1994, 440 p., ISBN 0-387-94096-0

    This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content