Communications - Scientific Letters of the University of Zilina 2015, 17(11):102-109 | DOI: 10.26552/com.C.2015.1A.102-109

Sine Wave Filters Design for AC Motor Drives with Genetic Algorithms

Mario Cacciato1, Giuseppe Scarcella1, Giacomo Scelba1, Pavol Spanik2
1 Department of Electrical, Electronics and Computer Science, University of Catania, Italy
2 Department of Mechatronics and Electronics, Faculty of Electrical Engineering, University of Zilina, Slovakia

This paper proposes a suitable design methodology of the filter used at the output of inverters for AC motor drives. While it allows to achieve the best tradeoff among different design constraints that are difficult to include in standard design methods, such an approach is able to simultaneously consider several technical issues such as losses and voltage drops of the filter, total harmonic distortion of currents and voltages as well as economic aspects. Accordingly, the proposed procedure determines the optimal values of the filter parameters by exploiting simulations of accurate model of the electrical drive and genetic algorithms. Hence, no rough approximations or complex analytical calculations are performed to suitably design the inverter output filter. The method was validated by means of various tests performed on two different induction motor drives, considering some significant design constraint scenarios.

Keywords: power filters; variable speed drives; genetic algorithms; design optimization

Published: April 30, 2015  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Cacciato, M., Scarcella, G., Scelba, G., & Spanik, P. (2015). Sine Wave Filters Design for AC Motor Drives with Genetic Algorithms. Communications - Scientific Letters of the University of Zilina17(1A), 102-109. doi: 10.26552/com.C.2015.1A.102-109
Download citation

References

  1. VITTEK, J., FTOREK, B.: Energy Efficient Speed and Position Control of Electric Drives with PMSM, Communications - Scientific Letters of the University of Zilina, 16 (1), 2014, pp. 64-71. Go to original source...
  2. CACCIATO, M., CONSOLI, A., FINOCCHIARO, L., TESTA, A.: High Frequency Analysis and Modeling of Bearing Currents and Shaft Voltage on Electrical Motors, Proc. of the IEEE Eighth Intern. Conference on Electrical Machines and Systems, ICEMS 2005, Nanjing, pp. 27-29 September 2005, pp. 2065-2070. Go to original source...
  3. SERPORTA, C., TINE, G., VITALE, G., DI PIAZZA, M. C.: Conducted EMI in Power Converters Feeding AC Motors: Experimental Investigation and Modelling, Proc. of the 2000 IEEE Intern. Symposium on Industrial Electronics, ISIE 2000, 2000, Cholula : Puebla, pp. 359-364.
  4. CACCIATO, M., CAVALLARO, C., SCARCELLA, G., TESTA, A.: Effects of Connection Cable Length on Conducted EMI in Electric Drives, Proc. of IEEE Intern. Conference on Electric Machines and Drives, IEMDC '99, 1999, Seattle, pp. 428-430.
  5. MOREIRA, A. F., SANTOS, P. M., LIPO, T. A., VENKATARAMANAN, G.: Filter Networks for Long Cable Drives and their Influence on Motor Voltage Distribution and Common-mode Currents, IEEE Transactions on Industrial Electronics, vol. 52, No. 2, 2005, pp. 515-522. Go to original source...
  6. SALOMAKI, J., HINKKANEN, M., LUOMI, J.: Cost-Effective Design of Inverter Output Filters for AC Drives, IEEE 33rd Annual Conference of the Industrial Electronics Society, IECON 2007, pp. 1220-1226. Go to original source...
  7. HANIGOVSZKI, N., LANDKILDEHUS, J., BLAABJERG, F.: Output Filters for AC Adjustable Speed Drives, Proc. of Twenty Second Annual IEEE Applied Power Electronics Conference, APEC 2007, 2007, Anaheim, pp. 236-242. Go to original source...
  8. CACCIATO, M., DE CARO, S., SCARCELLA, G., SCELBA, G., TESTA, A.: Improved Space-Vector Modulation Technique for Common Mode Currents Reduction, IET Power Electronics, vol. 6, No. 7, 2013, pp. 1248-1256. Go to original source...
  9. DI PIAZZA, M. C., LUNA, M., VITALE, G.: EMI Reduction in DC-Fed Electric Drives by Active Common-Mode Compensator IEEE Transactions on Electromagnetic Compatibility, early access, 2014, pp.1-10. Go to original source...
  10. CACCIATO, M., CONSOLI, A., SCARCELLA, G., SCELBA, G., TESTA, A.: Modified Space-Vector-Modulation Technique for Common Mode Currents Reduction and Full Utilization of the DC Bus, Proc. of Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition, APEC 2009, Feb. 2009, Washington DC, pp. 109-115. Go to original source...
  11. VON JOUANNE, A., ENJETI, P. N.: Design Considerations for an Inverter Output Filter to Mitigate the Effects of Long Motor Leads in ASD Applications, IEEE Transactions on Industry Applications, vol. 33, No.°5, 1997, pp. 1138-1145. Go to original source...
  12. LEE-HUN K., HWAN-KYUN Y., CHUNG-YUEN W., YOUNG-REAL K., GI-SU CH.: Output Filter Design for Conducted EMI Reduction of PWM Inverter-fed Induction Motor System, IEEE International Conference on Power Electronics and Drive Systems 2001, pp. 252-258. Go to original source...
  13. SOZER, Y., TORREY, D. A., REVA, S.: New Inverter Output Filter Topology for PWM Motor Drives, IEEE Transactions on Power Electronics, vol. 15, No.°6, 2000, pp. 1007-1017. Go to original source...
  14. ZUBI, H. M., DUNN, R. W., ROBINSON, F. V. P., EL-WERFELLI, M. H.: Passive Filter Design Using Genetic Algorithms for Adjustable Speed Drives, Proc. of IEEE Power and Energy Society General Meeting 2010, pp. 1-7. Go to original source...
  15. NORAINI, M. R., GERAGHTY, J: Genetic Algorithm Performance with Different Selection Strategies in Solving TSP, Proc. of the World Congress on Engineering, vol. II, WCE 2011, July, 2011, London
  16. LISERRE, M., DELL'AQUILA, A., BLAABJERG, F.: Genetic Algorithm-based Design of the Active Damping for an LCL-filter Three-phase Active Rectifier, IEEE Transactions on Power Electronics, vol. 19, No. 1, pp. 76-86, 2004. Go to original source...
  17. DRGONA, P., PRIKOPOVA, A., FRIVALDSKY, M., PRIECINSKY, M.: Simulation Based Method for Design and Application of Digital Control System, Communications - Scientific Letters of the University of Zilina, vol. 13 (2A), 2011, pp. 32-37. Go to original source...
  18. SALOMAKI, J., HINKKANEN, M., LUOMI, J.: Influence of Inverter Output Filter on Maximum Torque and Speed of PMSM Drives, IEEE Transactions on Industry Applications, vol. 44, No. 1, pp. 153, 160, 2008. Go to original source...
  19. CACCIATO, M., CONSOLI, A., SCELBA, G., SCARCELLA, G.: An Effective Energy-saving Scalar Control for Industrial IPMSM Drives, IEEE Transactions on Industrial Electronics, vol. 60 (9), 2013, pp. 3658-3669. Go to original source...
  20. FRIVALDSKY, M., DOBRUCKY, B., SCELBA, G., SPANIK, P., DRGONA, P.: Bidirectional Step-up/step-down DC-DC Converter with Magnetically Coupled Coils, Communications - Scientific Letters of the University of Zilina, 15 (3), 2013, pp. 21-25. Go to original source...
  21. CACCIATO, M., CONSOLI, A., SCARCELLA, G., SCELBA, G.: Indirect Maximum Torque per Ampere Control of Induction Motor Drives, EPE J. (European Power Electronics and Drives J.), 18 (4), pp. 34-41.

This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.