Communications - Scientific Letters of the University of Zilina 2019, 21(1):28-34 | DOI: 10.26552/com.C.2019.1.28-34

Durability Determination of the Bearing Structure of an Open Freight Wagon Body Made of Round Pipes during its Transportation on the Railway Ferry

Oleksij Fomin1, Juraj Gerlici2, Alyona Lovska3, Kateryna Kravchenko4, Pavlo Prokopenko5, Anna Fomina4, Vladimir Hauser2
1 Department of Cars and Carriage Facilities, State University of Infrastructure and Technology, Ukraine
2 Department of Transport and Handling Machines, Faculty of Mechanical Engineering, University of Zilina, Slovakia
3 Department of Cars, Ukrainian State University оf Railway Transport, Ukraine
4 Department of Railway, Road Transport and Handling Machines, Volodymyr Dahl East Ukrainian National University, Ukraine
5 Branch Research and Design and Technological Institute of Railway Transport "PJSC Ukrzaliznytsya", Ukraine

In order to reduce the cost of designing and manufacturing of the new-generation open wagons, it is proposed to construct their carrying systems from round pipes. In order to exploit the proposed designs of wagons in international rail-water communication, it is assumed that they will be equipped with assemblies for fastening of chain binders. The maximal values of accelerations, as components of dynamic load acting on open wagons, made from round pipes during their transportation on a railway ferry, are determined. It is established that when moving the body in the vertical direction for a wagon located on the upper deck, the maximum acceleration value is 0.84g, with angular displacement relative to the transverse axis for the extreme from the anchor point of the wagon body - is 0.1 g, with angular displacement around the longitudinal axis for the extreme from the bulwark of the body of the wagon - is 0.24g. The conducted researches will enable increased efficiency of operation of open wagons through international transport corridors.

Keywords: open freight wagon; bearing structure; strength; loading; rail-ferry transportation

Received: December 19, 2018; Accepted: January 27, 2019; Published: February 20, 2019  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Fomin, O., Gerlici, J., Lovska, A., Kravchenko, K., Prokopenko, P., Fomina, A., & Hauser, V. (2019). Durability Determination of the Bearing Structure of an Open Freight Wagon Body Made of Round Pipes during its Transportation on the Railway Ferry. Communications - Scientific Letters of the University of Zilina, 21(1), 28-34. doi: 10.26552/com.C.2019.1.28-34
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. FABIAN, T. P., et al. Versatile, efficient and long wagon for intermodal transport in Europe. Communications - Scientific Letters of the University of Zilina [online]. 2013, 15(2), p. 118-123. ISSN 1335-4205/eISSN 2585-7878. Available from: http://komunikacie.uniza.sk/index.php/communications/article/view/628 Go to original source...
    2. DIZO, J., HARUSINEC, J., BLATNICKY, M. Computation of modal properties of two types of freight wagon bogie frames using the finite element method. Manufacturing Technology [online]. 2018, 18(2), p. 208-214. ISSN 1213-2489. Available from: https://arl.ujep.cz/arl-ujep/en/csg/?repo=ujeprepo&key=62113834886 Go to original source...
    3. STASTNIAK, P., MORAVCIK, M. Freight bogie prototype properties analysis by means of simulation computations. Manufacturing Technology. 2017, 17(3), p. 381-388. ISSN 1213-2489. Go to original source...
    4. HAUSER, V., et al. Car body and bogie connection modification for track curves passability improvement. In 22nd Slovak-Polish Scientific Conference on Machine Modelling and Simulations (MMS 2017) : proceedings. Vol. 157. MATEC Web of Conferences [online], 2018. eISSN 2261-236X. Available from: https://doi.org/10.1051/matecconf/201815703009 Go to original source...
    5. GELVER, S. A. Investigation of the stressed-deformed state of the body of a freight open wagon of aluminium alloys, taking into account the physical nonlinearity of the material (in Russian). Ural Transport. 2008, 4(19), p. 20-23. ISSN 1815-9400.
    6. AFANASYEV, A. E. Improving the technique for assessing the technical condition and the rationale for extending the service life of open wagons (in Russian). Ural Transport. 2008, 1(16), p. 49-52. ISSN 1815-9400.
    7. MSC Software. MSC Software Corporation [online] Available from: http://www.mscsoftware.ru
    8. BEYN, D. G. Optimization of bodies of freight wagons of open type with a bearing floor (in Russian). Author's abstract of Ph.D. dissertation in Technical Sciences. Bryansk, Russia, 2011.
    9. FOMIN, O. V. Increase of the freight wagons ideality degree and prognostication of their evolution stages (in Russian). Scientific Bulletin of National Mining University [online]. 2015, 4(3), p. 68-76. ISSN 2071-2227/eISSN 2223-2362. Available from: http://nv.nmu.org.ua/index.php/ru/component/jdownloads/finish/54-03/8333-2015-03-fomin/0
    10. LOVSKA, A. A. Peculiarities of computer modeling of strength of body bearing construction of gondola car during transportation by ferry-bridge. Metallurgical and Mining Industry [online]. 2015, 1, p. 49-54. ISSN 2076-0507/eISSN 2078-8312. Available from: http://www.metaljournal.com.ua/assets/Journal/english-edition/MMI_2015_1/10%20Lovska.pdf
    11. NADER, M., et al. A railway car as an innovative engineering solution for transportation of semitrailers and road kits for intermodal transport. Logistyka. 2014, 4, p. 2272-2279. ISSN 1231-5478.
    12. PRIYA DIVYA, G., SWARNAKUMAR, I. A. Modeling and analysis of twenty tonne heavy duty trolley. International Journal of Innovative Technology and Research [online]. 2014, 2(6), p. 1568-1580. ISSN 2320-5547. Available from: http://www.ijitr.com/index.php/ojs/article/view/421/pdf
    13. KRASON, W., NIEZGODA, T. FE numerical tests of railway wagon for intermodal transport according to PN-EU standards. Bulletin of the Polish Academy of Sciences Technical Sciences [online]. 2014, 62(4), p. 843-851. ISSN 0239-7528. Available from: https://doi.org/10.2478/bpasts-2014-0093 Go to original source...
    14. MYAMLIN, S., et al. Determination of the dynamic characteristics of freight wagons with various bogie. Transport [online]. 2015, 30(1), p. 88-92. ISSN 1648-4142/eISSN 1648-3480. Available from: https://doi.org/10.3846/16484142.2015.1020565 Go to original source...
    15. FOMIN, O., et al. Experimental confirmation of the theory of implementation of the coupled design of center girder of the hopper wagons for iron ore pellets. Eastern-European Journal of Enterprise Technologies [online]. 2017, 5(1)(89), p. 1-19. ISSN 1729-3774/eISSN 1729-4061. Available from: https://doi.org/10.15587/1729-4061.2017.109588 Go to original source...
    16. OKOROKOV, A. M., et al. Research into a possibility to prolong the time of operation of universal semi-wagon bodies that have exhausted their standard resource. Eastern-European journal of enterprise technologies [online]. 2018, 3(7)(93), p. 20-26. ISSN 1729-3774/eISSN 1729-4061. Available from: https://doi.org/10.15587/1729-4061.2018.131309) Go to original source...
    17. FOMIN, O. V., LOVSKA, A. O., PLAKHTII, O. A., NERUBATSKYI, V. P. The influence of implementation of circular pipes in load-bearing structures of bodies of freight cars on their physico-mechanical properties. Scientific Bulletin of National Mining University [online]. 2017, 6, p. 89-96. ISSN 2071-2227/eISSN 2223-2362. Available from: http://nvngu.in.ua/jdownloads/pdf/2017/06/06_2017_Fomin.pdf
    18. LOVSKA, A. O. Improvement of bearing structures of open wagon bodies for increasing the reliability of their fastening on railroad ferries (in Ukrainian). Aauthor's abstract of Ph.D. dissertation in Technical Sciences. Kyiv, Ukraine, 2013.
    19. KIRYANOV, D. V. Mathcad 13 (in Russian). BKhV - St. Petersburg, 2006, p. 608. ISBN 978-5941578498.
    20. ALYAMOVSKY, A. A. SolidWorks/COSMOSWorks 2006 - 2007. Engineering analysis by the finite element method (in Russian). DMK, Series "Designing", Moscow, 2007, p. 784.
    21. EN 12663-2. Railway applications - Structural requirements of railway vehicle bodies - Part 2: Freight wagons.

    This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content