Communications - Scientific Letters of the University of Zilina 2019, 21(2):24-31 | DOI: 10.26552/com.C.2019.2.24-31

Determination of Parameters of Asynchronous Electric Machines with Asymmetrical Windings of Electric Locomotives

Sergey Goolak1, Juraj Gerlici2, Viktor Tkachenko1, Svitlana Sapronova3, Tomas Lack2, Kateryna Kravchenko2
1 Department of Traction Rolling Stock, State University of Infrastructure and Technologies, Kyiv, Ukraine
2 Department of Transport and Handling Machines, Faculty of Mechanical Engineering, University of Zilina, Slovak Republic
3 Department of Carriages and Carriage Economy, State University of Infrastructure and Technologies, Kyiv, Ukraine

This article is devoted to development of a method for calculating the parameters of an asynchronous motor of an electric locomotive with asymmetrical windings of stator and rotor. A method for determining self and mutual inductances of the stator and rotor phases of an asynchronous motor with asymmetric windings and their relations to mechanical variables is proposed. It is based on comparing two equations of stored magnetic energy, one equation calculated through induction, magnetic field strength and geometrical dimensions and another equation calculated through the parameters of the motor circuits. It is shown that the obtained solutions correspond to the previously existing methods, but they give the additional possibilities in mathematical modeling. The proposed technical solution allows higher accuracy developing of a mathematical model of a drive with an asynchronous motor having asymmetrical stator and rotor windings for studying dynamic processes during the operation of the specified drive, in particular, the drive of auxiliary machines for electric locomotive, where an asynchronous motor with asymmetrical stator windings is used as a phase release.

Keywords: magnetic field induction; mutual inductance; self-inductance; magnetic field strength

Received: February 8, 2019; Accepted: February 25, 2019; Published: May 24, 2019  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Goolak, S., Gerlici, J., Tkachenko, V., Sapronova, S., Lack, T., & Kravchenko, K. (2019). Determination of Parameters of Asynchronous Electric Machines with Asymmetrical Windings of Electric Locomotives. Communications - Scientific Letters of the University of Zilina, 21(2), 24-31. doi: 10.26552/com.C.2019.2.24-31
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. KUZNETSOV, V. V., NIKOLYENKO V. V. Models of operating asynchronous engines at poor-quality electricity (in Russian). East European Advanced Technology Journal [online]. 2015, 1(8(73)), p. 37-42. ISSN 1729-3774/eISSN 1729-4061. Available from: https://doi.org/10.15587/1729-4061.2015.36755
    2. PUSTOVYETOV, М., SOLTUS, К., SENYAVSKIY. I. Computer simulation of asynchronous motors and transformers. Examples of interaction with power electronic converters (in Russian). Monograph. Saarbrucken, Deutshland, Lap Lambert Academic Publishing, 2013. ISBN 3659407763, 9783659407765.
    3. GERLICI, J., et al. Investigation of influence of separator magnetic system configuration with permanent magnets on magnetic field distribution in working area. Electrical Engineering and Electromechanics [online]. 2017, 2, p. 13-17. ISSN 2074-272X. Available from: https://doi.org/10.20998/2074-272X.2017.2.02 Go to original source...
    4. GERLICI, J., LACK, T., HARUSINEC, J. Realistic simulation of railway operation on the RAILBCOT test stand. Applied Mechanics and Materials [online]. 2014, 486, p, 387-395. ISSN 1662-7482. Available from: https://doi.org/10.4028/www.scientific.net/AMM.486.387 Go to original source...
    5. DIZO, J., STEISUNAS, S., BLATNICKY, M. Vibration analysis of a coach with the wheel-flat due to suspension parameters changes. Procedia Engineering [online]. 2017, 192, p. 107-112. ISSN 1877-7058. Available from: https://doi.org/10.1016/j.proeng.2017.06.019 Go to original source...
    6. SMETANKA, L., ST'ASTNIAK, P., HARUSINEC, J. Wear research of railway wheelset profile by using computer simulation. MATEC Web of Conferences [online]. 2018, 157(2), 03017. ISSN 2261-236X. Available from: https://doi.org/10.1051/matecconf/201815703017 Go to original source...
    7. GERLICI, J., et al. Assessment of innovative methods of the rolling stock brake system efficiency increasing. Manufacturing Technology [online]. 2018, 18(1), p. 35-38. ISSN 1213-2489/ISBN 978-80-7414-325-0. Available from: https://arl.ujep.cz/arl-ujep/en/csg/?repo=ujeprepo&key=59578862639 Go to original source...
    8. RUAN, J. Y., WANG. S. M. Magnetizing curve estimation of induction motors in single-phase magnetization mode considering differential inductance effect. IEEE Transactions On Power Electronics [online]. 2016, 31(1), p. 497-506. ISSN 0885-8993/eISSN 1941-0107. Available from: https://doi.org/10.1109/TPEL.2015.2401835 Go to original source...
    9. CHIONCE, C.P., et al. Vector control structure of an asynchronous motor at maximum torque. IOP Conference Series: Materials Science and Engineering : proceedings. Vol. 106(1). International Conference on Applied Sciences ICAS 2015, 012005. Go to original source...
    10. PAKKIRAIAH, B., SUKUMAR, G. D. A new modified artificial neural network based mppt controller for the improved performance of an asynchronous motor drive. Indian Journal of Science and Technology [online]. 2016, 9(45), p. 1-10. ISSN 0974-6846/eISSN 0974-5645. Available from: https://doi.org/10.17485/ijst/2016/v9i45/105313 Go to original source...
    11. GUO, Z., WEI ZHANG Q. The study on mathematical model and simulation of asynchronous motor considering iron loss. Journal of Physics Conference Series [online]. 2018, 1060(1), p. 1-6. ISSN 1742-6588. Available from: https://doi.org/10.1088/1742-6596/1060/1/012085 Go to original source...
    12. DEMENTYEV, Y. N., UMURZAKOVA A. D. The engine mechanical coordinates measuring in the asynchronous motor. MATEC Web of Conferences [online]. 2014, 19, 01027. ISSN 2261-236X. Available from: https://doi.org/10.1051/matecconf/20141901027 Go to original source...
    13. BALARA, D., et al. Neural networks application for mechanical parameters identification of asynchronous motor. Neural Network World [online]. 2017, 3, p. 259-270. ISSN 1210-0552/eISSN 2336-4335. Available from: https://doi.org/10.14311/NNW.2017.27.013 Go to original source...
    14. МUGALIMOV, R. G., HRAMSHIN, W. Y., МUGALIMOVA, A. R. Comparative analysis of the methods for calculating the parameters of electric circuits for the replacement of induction motors (in Russian). Electrical Engineering: Network Electronic Scientific Journal. 2016, 3(1), p. 36-40. eISSN 2313-8742.
    15. TERYOHIN, А. А., DADYENKOV, D. A. An overview of how to identify the parameters of an asynchronous electric drive (in Russian). Vesnik of the Perm National Research Polytechnic University. Electrical Engineering, Information Technology, Control Systems. 2017, 2, p. 55-66. ISSN 2224-9397/еISSN 2305-2767.
    16. GOOLAK, S. O., et al. Determination of dynamic variables of a generalized asynchronous motor (in Ukrainian). Collection of scientific works of the State economic-technological university of transport. Series: Transport Systems and Technologies. 2016, 29, p. 143-153.
    17. NIKOLAYEV, A. A., MUTALLAPOVA, F. F. Development of an improved block diagram of an asynchronous motor in the d-q coordinate system relative to the rotor without reference to the reference vector (in Russian). Russian Internet Journal of Electrical Engineering [online]. 2017, 4(2), p. 3-12. ISSN 2313-8742. Available from: https://doi.org/10.24892/RIJEE/20170201
    18. EPSHTEIN, I. I. Calculation of parameters of the asynchronous motor. Energy saving (in Russian). Energetics. Energy audit. 2014, 8(126). p. 57-61. ISSN 2218-1849/еISSN 2313-8890.
    19. SIVOKOBYLENKO, V. F., TKACHENKO, S. N., DERKAYOV, S.V. Determination of the parameters of equivalent circuits and characteristics of asynchronous motors (in Russian). Electricity. 2014, 10, p. 38-44. ISSN 0013-5380/еISSN 2411-1333.
    20. LING, Z., et al. Equivalent circuit parameters calculation of induction motor by finite element analysis. IEEE Transactions on Magnetics [online]. 2014, 50(2), p. 1-2. ISSN 0018-9464. Available from: https://doi.org/10.1109/TMAG.2013.2282185 Go to original source...
    21. ZAGIRNYAK, M., et al. Correction of the operating modes of an induction motor with asymmetrical stator windings at vector control. International Conference on Electrical Drives and Power Electronics EDPE : proceedings [online]. 2015. p. 74-79. eISSN 1339-3944. Available from: https://doi.org/10.1109/EDPE.2015.7325303 Go to original source...
    22. NGUYEN, V., et al. A Method for incipient interturn fault detection and severity estimation of induction motors under inherent asymmetry and voltage imbalance. IEEE Transactions on Transportation Electrification [online]. 2017, 3(3), p. 703-715. eISSN 2332-7782. Available from: https://doi.org/10.1109/TTE.2017.2726351 Go to original source...
    23. GHIAL, V. K., SAINI, L. M., SAINI, J. S. Parameter estimation of permanent-split capacitor-run single-phase induction motor using computed complex voltage ratio. IEEE Transactions on Industrial Electronics [online]. 2014, 61(2), p. 682-692. ISSN 0278-0046/eISSN 1557-9948. Available from: https://doi.org/10.1109/TIE.2013.2253067 Go to original source...
    24. TKACHENKO, V., at al. Research into resistance to the motion of railroad undercarriages related to directing the wheelsets by a rail track. Eastern-European Journal of Enterprise Technologies [online]. 2017, 5/7(89), p. 65-72. ISSN 1729-3774/eISSN 1729-4061. Available from: https://doi.org/10.15587/1729-4061.2017.109791 Go to original source...
    25. МALYAR, V. S., МALYAR, A. V. Steady-state modes and static characteristics of a three-phase asynchronous motor powered by a single-phase network (in Russian). Energetics. News of Higher Educational Institutions and Energy Associations of the CIS. 2016, 6, p. 536-548. ISSN 1029-7448/еISSN 2414-0341.
    26. GOOLAK, S. O., YERMOLENKO, Е. К. Development of a mathematical model for the investigation of the operation of supplementary machines of electric locomotives of series of VL-80T,K, working in not-sinusoidal and not-symmetrical modes (in Ukrainian). Visnyk of the Volodymyr Dahl East-Ukrainian National University. 2018, 2(243), p. 80-92. ISSN 1998-7927.
    27. KESSLER, M., ANDRES, M., SCHMITT, T. Control and characteristic map generation of permanent magnet synchronous machines and induction machines with squirrel cage. 10th International Modelica Conference : proceedings [online]. Linkopings Iniversitet : Linkoping University Electronic Press, 2014. ISBN 978-91-7519-380-9, p. 1151-1160. Available from: https://doi.org/10.3384/ecp14096 Go to original source...
    28. GOOLAK, S.: Methodological recommendations for the application of the model of physical processes in three-phase asynchronous motor (in Ukrainian). Collection of scientific works of the State economic-technological university of transport. Series: Transport Systems and Technologies. 2018, 1(32), p. 4-13.
    29. MARTINEZ, J., BELAHCEN, A., ARKKIO A. 3D permeance model of induction machines taking into account saturation effects and its connection with stator current and shaft speed spectra. IET Electric Power Applications [online]. 2015, 9(1), p. 20-29. ISSN 1751-8660. Available from: https://doi.org/10.1049/iet-epa.2014.0013 Go to original source...

    This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content