Communications - Scientific Letters of the University of Zilina 2021, 23(2):B89-B96 | DOI: 10.26552/com.C.2021.2.B89-B96

Optimization of Ingredients upon Development of the Protective Polymeric Composite Coatings for the River and Sea Transport

Andriy Buketov ORCID...1, Serhii Yakushchenko ORCID...1, Abdellah Menou ORCID...2, Oleh Bezbakh ORCID...1, Roman Vrublevskyi ORCID...1, Yaroslava Kalba ORCID...3, Tetyana Cherniavska ORCID...1, Danylo Zhytnyk1, Olha Danylyuk ORCID...3
1 Kherson State Maritime Academy, Kherson, Ukraine
2 International Academy of Civil Aviation, Casablanca, Morocco
3 Ternopil Volodymyr Hnatiuk National Pedagogical University, Ternopil, Ukraine

It is proved that in order to increase the operational characteristics of parts of the river and sea transport, including their physical and mechanical properties, it is advisable to use the protective polymeric composite coatings.
The effect of fillers on the flexural stresses of the developed epoxy composite was analyzed. The critical content of components was determined by the method of mathematical planning of the experiment: the synthesized powder mixture - 0.05 pts.wt., discrete fibers - 0.10 to 0.15 pts.wt. per 100 pts.wt. of epoxy oligomer ED-20. Introduction of such ingredients into the epoxy binder allows to increase the flexural stresses to σ f=77.4…78.6 MPa. The obtained results allow to create materials with improved values of physical and mechanical properties.

Keywords: composite; epoxy matrix; method of mathematical planning of the experiment; regression equation

Received: May 5, 2020; Accepted: August 10, 2020; Prepublished online: December 18, 2020; Published: April 1, 2021  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Buketov, A., Yakushchenko, S., Menou, A., Bezbakh, O., Vrublevskyi, R., Kalba, Y., ... Danylyuk, O. (2021). Optimization of Ingredients upon Development of the Protective Polymeric Composite Coatings for the River and Sea Transport. Communications - Scientific Letters of the University of Zilina, 23(2), B89-96. doi: 10.26552/com.C.2021.2.B89-B96
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. FRIEDRICH, K. Polymer composites for tribological applications. Advanced Industrial and Engineering Polymer Research [online]. 2018, 1(1), p. 3-39. ISSN 2542-5048. Available from: https://doi.org/10.1016/j.aiepr.2018.05.001 Go to original source...
    2. GUZANOVA, A., BREZINOVA, J., DRAGANOVSKA, D., MARUSCHAK, P. O. Properties of coatings created by HVOF technology using micro-and nano-sized powder. Koroze a Ochrana Materialu [online]. 2019, 63, p. 86-93. eISSN 1804-1213. Available from: https://doi.org/10.2478/kom-2019-0011 Go to original source...
    3. BUKETOV, A. V., SAPRONOV, O. O., BRAILO, M. V., MARUSCHAK, P. O., YAKUSHCHENKO, S. V., PANIN, S. V., NIGALATIY, V. D. Dynamics of destruction of epoxy composites filled with ultra-dispersed diamond under impact conditions. Mechanics of Advanced Materials and Structures [online]. 2020, 27(9), p. 725-733. ISSN 1537-649, eISSN 1537-6532. Available from: https://doi.org/10.1080/15376494.2018.1495788 Go to original source...
    4. STUKHLYAK, P. D., BUKETOV, A. V., PANIN, S. V., MARUSCHAK, P. O., MOROZ, K. M., POLTARANIN, M. A., VUKHERER, T., KORNIENKO, L. A., LYUKSHIN, B. A. Structural fracture scales in shock-loaded epoxy composites. Physical Mesomechanics [online]. 2015, 18, p. 58-74. ISSN 1029-9599, eISSN 1990-5424. Available from: https://doi.org/10.1134/S1029959915010075 Go to original source...
    5. BUKETOV, A. V., BRAILO, M. V., STUKHLYAK, D. P., YAKUSHCHENKO, S. V., SAPRONOV, O. O., CHERNIAVSKYI, V. V., HUSIEV, V. M., DMITRIEV, D. A., YATSYUK, V. M., BEZBAKH, O. M., NEGRUTSA, R. Y. Optimization of components in development of polymeric coatings for restoration of transport vehicles. Bulletin of the Karaganda University. Mathematics Series [online]. 2018, 92(4), p. 119-131. ISSN 2518-7929, eISSN 2663-5011. Available from: https://doi.org/10.31489/2018M4/119-131 Go to original source...
    6. ZHANG, L., ZHANG, G., CHANG, L., WETZEL, B., JIM, B., WANG, Q. Distinct tribological mechanisms of silica nanoparticles in epoxy composites reinforced with carbon nanotubes, carbon fibers and glass fibers. Tribology International [online]. 2016, 104, p. 225-236. ISSN 0301-679X. Available from: https://doi.org/10.1016/j.triboint.2016.09.001 Go to original source...
    7. BUKETOV, A. V., STUKHLYAK, P. D., KALBA, E. M. Physicochemical processes in the formation of epoxy composite materials (in Ukrainian). Ternopil: Zbruch, 2005.
    8. MARINI, M., RIVALTA, E., MOLENDI, P., DI SILVESTRI, P., BONACINI, C. Mechanical analysis of structural adhesive for marine joints. Journal of Adhesion Science and Technology [online]. 2013, 27, p. 820-824. ISSN 0169-4243, eISSN 1568-5616. Available from: https://doi.org/10.1080/01694243.2012.727152 Go to original source...
    9. DAS, G., BISWAS, S. Physical, mechanical and water absorption behaviour of coir fiber reinforced epoxy composites filled with Al2O3 particulates. IOP Conference Series: Materials Science and Engineering [online]. 2016, 115, 012012. ISSN 1757-8981, eISSN 1757-899X. Available from: https://doi.org/10.1088/1757-899X/115/1/012012 Go to original source...
    10. ASTM D790-03. Standard Test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials [online]. Available from: https://www.astm.org/database.cart/historical/D790-03.htm.
    11. BRAILO, M. V., BEZBAKH, O. M., HUSIEV, V. M., YAKUSHCHENKO, S. V. Modified epoxy matrix with improved properties for protection of transport vehicles. Bulletin of the Karaganda University. Mathematics series. 2019, 95(3), p. 88-100. ISSN 2518-7929, eISSN 2663-5011. Go to original source...
    12. ASGHAR, A., RAMAN, A., AZIZ, A., DAUD, W. M. A. W. A comparison of central composite design and Taguchi method for optimizing Fenton process. The Scientific World Journal [online]. 2014, 2014, 869120. ISSN 2356-6140, eISSN 1537-744X. Available from: https://doi.org/10.1155/2014/869120 Go to original source...
    13. RAJMOHAN, T., PALANIKUMAR, K. Application of the central composite design in optimization of machining parameters in drilling hybrid metal matrix composites. Measurement [online]. 2013, 46(4), p. 1470-1481. ISSN 0263-2241. Available from: https://doi.org/10.1016/j.measurement.2012.11.034 Go to original source...
    14. WILRICH, P. T. Critical values of Mandel's h and k, the Grubbs and the Cochran test statistic. AStA Advances in Statistical Analysis [online]. 2013, 97(1), p. 1-10. ISSN 1863-8171, eISSN 1863-818X. Available from: https://doi.org/10.1007/s10182-011-0185-y Go to original source...
    15. BAXEVANAKIS, C., JEULIN, D., VALENTIN, D. Fracture statistics of single-fibre composite specimens. Composites Science and Technology [online]. 1993, 48(1-4), p. 47-56. ISSN 0266-3538. Available from: https://doi.org/10.1016/0266-3538(93)90119-2 Go to original source...
    16. BALESCU, R. C. Equilibrium and non-equilibrium statistical mechanics. John Wiley & Sons, 1975. ISBN 9780471046004.
    17. KIM, H. Y. Statistical notes for clinical researchers: chi-squared test and Fisher's exact test. Restorative Dentistry and Endodontics [online]. 2017, 42(2), p. 152-155. ISSN 2234-7658, eISSN 2234-7666. Available from: https://doi.org/10.5395/rde.2017.42.2.152 Go to original source...
    18. COHEN, J. Statistical power and analysis for the behavioral sciences. 2nd ed. Hisdale, NJ: Lawrence Erlbaum Associates;1988, p. 79-8.
    19. BUKETOV, A., MARUSCHAK, P., SAPRONOV, O., ZINCHENKO, D., YATSYUK, V., PANIN, S. Enhancing performance characteristics of equipment of sea and river transport by using epoxy composites. Transport [online]. 2016, 31(3), p. 333-342. ISSN 1648-4142, eISSN 1648-3480. Available from: https://doi.org/10.3846/16484142.2016.1212267 Go to original source...

    This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content