Communications - Scientific Letters of the University of Zilina 2022, 24(2):B99-B105 | DOI: 10.26552/com.C.2022.2.B99-B105

Comparative Study of Residual Stress Prediction Methods in Additive Manufacturing Processes

Suyambazhahan Sivalingam ORCID...1, Sunny Narayan ORCID...2, Sakthivel Rajamohan ORCID...3, Ivan Grujic ORCID...4, Nadica Stojanovic ORCID...4
1 Department of Mechanical Engineering, School of Mechanical, Chemical, and Materials Engineering, Adama Science and Technology University, Adama, Ethiopia
2 Mechanical Engineering Department, Qassim University, Burydah, Saudi Arabia
3 Amrita School of Engineering, Amrita Vishwa Vidyapeetham, Coimbatore, Tamilnadu, India
4 Motor Vehicle Engineering Department, University of Kragujevac, Serbia

The additive manufacturing (AM) of products involves various processes, such as raising the temperature of a work-piece (part) and substrate to the melting point and subsequent solidification, using a movable source of heat. The work piece is subjected to repeated cycles of heating and cooling. The main objective of this work was to present an overview of the various methods used for prediction of the residual stresses and how their contributions can be used to improve current additive manufacturing methods. These novel methods of manufacturing have several merits, compared to conventional methods. Some of these merits include the lower costs, higher precision and accuracy of manufacturing, faster processing time and more eco-friendly approaches to processes involved.

Keywords: additive manufacturing, 3-D printing, residual stresses, ANSYS, FLUENT, laser melting

Received: March 14, 2021; Accepted: July 26, 2021; Prepublished online: December 2, 2021; Published: April 1, 2022  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Sivalingam, S., Narayan, S., Rajamohan, S., Grujic, I., & Stojanovic, N. (2022). Comparative Study of Residual Stress Prediction Methods in Additive Manufacturing Processes. Communications - Scientific Letters of the University of Zilina, 24(2), B99-105. doi: 10.26552/com.C.2022.2.B99-B105
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. What is additive manufacturing? - GE Additive [online]. Available from: https://www.ge.com/additive/additive-manufacturing
    2. HODGE, N. E., FERENCZ, R. M.,VIGNES, R. M. Experimental comparison of residual stresses for a thermo mechanical model for the simulation of selective laser melting. Additive Manufacturing [online]. 2016, 12(B), p. 159-168. ISSN 2214-8604. Available from: https://doi.org/10.1016/j.addma.2016.05.011 Go to original source...
    3. KELLER, N., PLOSHIKHIN, V. New method for fast predictions of residual stress and distortion of am parts [online]. 2015. Available from: https://sffsymposium.engr.utexas.edu/sites/default/files/2014-096-Keller.pdf
    4. SANTOS, L. S., GUPTA, S. K., BRUCK, H. A. Simulation of buckling of internal features during selective laser sintering of metals. Additive Manufacturing [online]. 2018, 23, p. 235-245. ISSN 2214-8604. Available from: https://doi.org/10.1016/j.addma.2018.08.002 Go to original source...
    5. ZHANG, X. H., AN, Q. L., CHEN, M. Residual stress prediction by adaptive neuro-fuzzy system in milling aluminum alloy. Key Engineering Materials [online]. 2008, 392-394, p. 504-508. ISSN 1662-9795. Available from: https://doi.org/10.4028/www.scientific.net/KEM.392-394.504 Go to original source...
    6. Third Wave [online]. Available from: https://thirdwavesys.com/wp-content/uploads/2014/06/fem-sim-of-r-stresses-in-machining-titanium.pdf
    7. MEYGHANI, B., AWANG, M., EMAMIAN, S. A comparative study of finite element analysis for friction stir welding application. APRN Journal of Engineering and Applied Sciences. 2016, 11(22), p. 12984-12989. ISSN 1819-6608.
    8. KORTABARRI, A., MADARIAG, A., FERNANDEZ, E., ESNAOL, J. A., ARRAZOLA, P. J. A comparative study of residual stress profiles on Inconel 718 induced by dry face turning. Procedia Engineering [online]. 2018, 19, p. 228-234. ISSN 1877-7058. Available from: https://doi.org/10.1016/j.proeng.2011.11.105 Go to original source...
    9. MUKHERJEE, T., ZHANG, W., DEBROY., T. An improved prediction of residual stresses and distortion in additive manufacturing. Computational Materials Science [online]. 2017, 126, p. 360-372. ISSN 0927-0256. Available from: https://doi.org/10.1016/j.commatsci.2016.10.003 Go to original source...
    10. HUANG, X.-D., ZHANG, X.-M., LEOPOLD, J., DING, H. Analytical model for prediction of residual stress in dynamic orthogonal cutting process. Journal of Manufacturing Science and Engineering [online]. 2017, 140(1), 011002. ISSN 1087-1357, eISSN 1528-8935. Available from: https://doi.org/10.1115/1.4037424 Go to original source...
    11. YANG, Y. P., JAMSHIDINIA, M., BOULWARE, P. Prediction of microstructure, residual stress and deformation in laser powder bed fusion process. Computational Mechanics [online]. 2017, 61, p. 599-615. ISSN 0178-7675, eISSN 1432-0924. Available from: https://doi.org/10.1007/s00466-017-1528-7 Go to original source...
    12. MEGAHED, M., MINDT, H.-W., N'DRI, N., DUAN, H., DESMAISON, O. Metal additive-manufacturing process and residual stress modeling. Integrating Materials and Manufacturing Innovation [online]. 2016, 5, p. 61-93. ISSN 2193-9764, eISSN 2193-9772. Available from: https://doi.org/10.1186/s40192-016-0047-2 Go to original source...
    13. LEVY, G. N., SCHINDEL, R., KRUTH, J. Rapid manufacturing and rapid tooling with layer manufacturing (LM) technologies, state of the art and future perspectives. CIRP Annuals - Manufacturing Technology. 2003, 52(2), p. 589-609. ISSN 0007-8506. Go to original source...
    14. DEBROY, T., WEI, H. L., ZUBACK, J. S., MUKHERJEE, T., ELMER, J. W., MILEWSKI, J. O., BEESE, A. M., WILSON-HEID, A., DE, A., ZHANG. W. Additive manufacturing of metallic components - process, structure and properties. Progress in Materials Science [online]. 2018, 92, p. 112-224. ISSN 0079-6425. Available from: https://doi.org/10.1016/j.pmatsci.2017.10.001 Go to original source...
    15. KRUTH, J., LEU, M., NAKAGAWA, T. Progress in additive manufacturing and rapid prototyping. CIRP Annuals - Manufacturing Technology. 1998, 47(2), p. 525-540. ISSN 0007-8506. Go to original source...
    16. MEINERS, W., WISSENBACH, K., GASSER, A. Shaped body especially prototype or replacement part production. DE Patent, 1998.
    17. FRAZIER, W. E. Metal additive manufacturing: a review. Journal of Materials Engineering and Performance [online]. 2014, 23(6), p. 1917-1928. ISSN 1059-9495. Available from: https://doi.org/10.1007/s11665-014-0958-z Go to original source...
    18. MURR, L. E., GAYTAN, S. M., RAMIREZ, D. A., MARTINEZ, E., HERNANDEZ, J., AMATO, K. N., SHINDO, P. W., MEDINA, F. R., WICKER, R. B. Metal fabrication by additive manufacturing using laser and electron beam melting technologies. Journal of Material Science and Technology [online]. 2012, 28(1), p. 1-14. ISSN 1005-0302. Available from: https://doi.org/10.1016/S1005-0302(12)60016-4 Go to original source...
    19. GIBSON, I., ROSEN, D., STUCKER, B. Additive manufacturing technologies. Berlin: Springer; 2010. ISBN 978-1-4939-2113-3. Go to original source...
    20. FLYNN, J. M., SHOKRANI, A., NEWMAN, S. T., DHOKIA, V. Hybrid additive and subtractive machine tools - research and industrial developments. International Journal of Machine Tools and Manufacture [online]. 2016, 101, p. 79-101. ISSN 0890-6955. Available from: http://dx.doi.org/10.1016/j.ijmachtools.2015.11.007 Go to original source...
    21. MIRELES, J., KIM, H., LEE, I. H., ESPALIN, D., MEDINA, F., MACDONALD, E., WICKER, R. Development of a fused deposition modeling system for low melting temperature metal alloys. Journal of Electronic Packaging [online]. 2013, 135(1), p. 011008. ISSN 1043-7398, eISSN 1528-9044. Available from: https://doi.org/10.1115/1.4007160 Go to original source...
    22. SHIOMI, M., OSAKADA, K., NAKAMURA, K., YAMASHITA, T., ABE, F. Residual stress within metallic model made by selective laser melting process. CIRP Annuals - Manufacturing Technology. 2004, 53(1), p. 195-198. ISSN 0007-8506. Go to original source...
    23. MERCELIS, P., KRUTH, J. Residual stresses in selective laser sintering and selective laser melting. Rapid Prototyping Journal [online]. 2006, 12(5), p. 254-265. ISSN 1355-2546. Available from: https://doi.org/10.1108/13552540610707013 Go to original source...
    24. BUCHBINDER, D., MEINERS, W., PIRCH, N., WISSENBACH, K., SCHRAGE, J. Investigation on reducing distortion by preheating during manufacture of aluminum components using selective laser melting. Journal of Laser Applications [online]. 2014, 26(1), 012004. eISSN 1938-1387. Available from: https://doi.org/10.2351/1.4828755 Go to original source...
    25. ZAEH, M. F., BRANNER, G. Investigations on residual stresses and deformations in selective laser melting. Production Engineering [online]. 2010, 4(1), p. 35-45. ISSN 0944-6524, eISSN 1863-7353. Available from: https://doi.org/10.1007/s11740-009-0192-y Go to original source...
    26. VILARO, T., COLIN, C., BARTOUT, J. As-fabricated and heat-treated microstructures of the Ti-6Al-4V alloy processed by selective laser melting. Metallurgy Material Transactions A [online]. 2011, 42(10), p. 3190-3199. ISSN 1073-5623. Available from: https://doi.org/10.1007/s11661-011-0731-y Go to original source...
    27. KRUTH, J., DECKERS, J., YASA, E., WAUTHLER, R. Assessing and comparing influencing factors of residual stresses in selective laser melting using a novel analysis method. Proceedings of Institute of Mechanical Engineers Part B: Journal of Engineering Manufacturing [online]. 2012, 226(6), p. 980-991. ISSN 0954-4054, eISSN 2041-2975. Available from: https://doi.org/10.1177/0954405412437085 Go to original source...
    28. LI, C., LIU, J., GUO, Y. Prediction of residual stress and part distortion in selective laser melting. Procedia CIRP [online]. 2016, 45, p. 171-174. ISSN 2212-8271. Available from: https://doi.org/10.1016/j.procir.2016.02.058 Go to original source...
    29. WITHERS, P., BHADESHIA, H. Residual stress. Part 1 - measurement techniques. Materials Science and Technology [online]. 2001, 17(4), p. 355-365. ISSN 0267-0836, eISSN 1743-2847. Available from: https://doi.org/10.1179/026708301101509980 Go to original source...
    30. OLIVEIRA, U., OCELÍK, V., DE HOSSON, J. T. M. Residual stress analysis in co- based laser clad layers by laboratory X-rays and synchrotron diffraction techniques. Surface and Coatings Technology [online]. 2006, 201(3-4), p. 533-542. ISSN 0257-8972. Available from: https://doi.org/10.1016/j.surfcoat.2005.12.011 Go to original source...
    31. RANGASWAMY, P., GRIFFITH, M., PRIME, M., HOLDEN, T., ROGGE, R., EDWARDS, J., SEBRING, R. Residual stresses in LENS® components using neutron diffraction and contour method. Materials Science and Engineering: A [online]. 2005, 399(1-2), p. 72-83. ISSN 0921-5093. Available from: https://doi.org/10.1016/j.msea.2005.02.019 Go to original source...
    32. DENLINGER, E. R., HEIGEL, J. C., MICHALERIS, P., PALMER, T. A. Effect of inter - layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys. Journal of Materials Processing Technology [online]. 2015, 215, p. 123-131. ISSN 0924-0136. Available from: https://doi.org/10.1016/j.jmatprotec.2014.07.030 Go to original source...
    33. TAMMAS-WILLIAMS, S., ZHAO, H., LEONARD, F., DERGUTI, F., TODD, I., PRANGNELL, P. XCT analysis of the influence of melt strategies on defect population in Ti-6Al-4V components manufactured by selective electron beam melting. Materials Characterization [online]. 2015, 102, p. 47-61. ISSN 1044-5803. Available from: https://doi.org/10.1016/j.matchar.2015.02.008 Go to original source...
    34. BRINKSMEIER, E., LEVY, G., MEYER, D., SPIERINGS, A. Surface integrity of selective-laser-melted components. CIRP Annuals - Manufacturing Technology [online]. 2010, 59(1), p. 601-606. ISSN 0007-8506. Go to original source...

    This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content