Communications - Scientific Letters of the University of Zilina 2022, 24(2):D59-D71 | DOI: 10.26552/com.C.2022.2.D59-D71

Structural Behavior of Prestressed Concrete Bridge Girder with Epoxy Joint

Assylkhan Jalairov ORCID...1, Dauren Kumar ORCID...2, Khaini-Kamal Kassymkanova ORCID...3, Zeynep Sarsembekova ORCID...2, Gulzhan Nuruldaeva ORCID...4, Gulnar Jangulova ORCID...2
1 Department of Transport, Construction, Bridges and Tunnels, Kazakh University of Way Transport, Almaty, Republic of Kazakhstan
2 Department of Cartography and Geoinformatics, Al-Farabi Kazakh National University, Almaty, Republic of Kazakhstan
3 Satbayev University, Almaty, Republic of Kazakhstan
4 Institute of Architecture and Construction, Satbayev University, Almaty, Republic of Kazakhstan

The study object is a prototype of a composite bridge prestressed concrete beam with a length of 42.0 m for road bridge desks for perception of impact from motor vehicles in the form of A14, NK-120 and NK-180 loads.

Keywords: composite bridge beam, outer or end segment, middle segment, tests, stiffness, crack resistance, strength

Received: August 4, 2021; Accepted: October 6, 2021; Prepublished online: January 26, 2022; Published: April 1, 2022  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Jalairov, A., Kumar, D., Kassymkanova, K., Sarsembekova, Z., Nuruldaeva, G., & Jangulova, G. (2022). Structural Behavior of Prestressed Concrete Bridge Girder with Epoxy Joint. Communications - Scientific Letters of the University of Zilina, 24(2), D59-71. doi: 10.26552/com.C.2022.2.D59-D71
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. GOST 13840-68*. Reinforced steel ropes 1x7. Specifications.
    2. HUGUES, S., SAO, S. K, ALAIN, L. New beam-to-beam joint with concrete embedding for composite bridges: experimental study and finite element modelling. Journal of Constructional Steel Research [online]. 2012, 77, p. 210-222. ISSN 0143-974X. Available from: https://doi.org/10.1016/j.jcsr.2012.05.007 Go to original source...
    3. RAJAN, S. Developments in the durability of FRP-concrete bond. Construction and Building Materials [online]. 2015, 78, p. 112-125 [accessed 2014-12-28]. ISSN 0950-0618. Available from: https://doi.org/10.1016/j.conbuildmat.2014.12.106 Go to original source...
    4. WEIZHUO, S., BEHROUZ, S., ZHENGUU, L. Longitudinal box-beam bridge joints under monotonic and cyclic loads. Engineering Structures [online]. 2021, 220, 110976 [accessed 2020-06-14]. ISSN 0141-0296. Available from: https://doi.org/10.1016/j.engstruct.2020.110976 Go to original source...
    5. AL-BAYATI, R., AL-MAHAIDI, G., KALFAT, R. Torsional strengthening of reinforced concrete beams using different configurations of NSM FRP with epoxy resins and cement-based adhesives. Composite Structures [online]. 2017, 168, p. 569-581 [accessed 2016-12-09]. ISSN 0263-8223. Available from: https://doi.org/10.1016/j.compstruct.2016.12.045 Go to original source...
    6. AL-BAYATI, R., AL-MAHAIDI, G., KALFAT, R. Experimental investigation into the use of NSM FRP to increase the torsional resistance of RC beams using epoxy resins and cement-based adhesives. Construction and Building Materials [online]. 2016, 124, p. 1153-1164 [accessed 2016-08-24]. ISSN 0950-0618. Available from: https://doi.org/10.1016/j.conbuildmat.2016.08.095 Go to original source...
    7. JOJIBABU, P., ZHANG, Y.X., B. GANGADHARA, P.B. A review of research advances in epoxy-based nanocomposites as adhesive materials. International Journal of Adhesion and Adhesives [online]. 2020, 96, 102454 [accessed 2019-10-12]. ISSN 0143-7496. Available from: https://doi.org/10.1016/j.ijadhadh.2019.102454 Go to original source...
    8. KUMAR, P., PATNAIK, A., CHAUDHARY, S. A review on application of structural adhesives in concrete and steel-concrete composite and factors influencing the performance of composite connections. International Journal of Adhesion and Adhesives [online]. 2017, 77, p. 1-14 [accessed 2017-03-21]. ISSN 0143-7496. Available from: https://doi.org/10.1016/j.ijadhadh.2017.03.009 Go to original source...
    9. JIANG, C., WAN, B., WU, Y., OMBOKO, J. Epoxy interlocking: a novel approach to enhance FRP-to-concrete bond behavior. Construction and Building Materials [online]. 2018, 193, p. 643-653 [accessed 2018-11-08]. ISSN 0950-0618. Available from: https://doi.org/10.1016/j.conbuildmat.2018.10.183 Go to original source...
    10. CAMPILHO, R. D. S .G., BANEA, M. D., NETO, J. A. B. P., DA SILVA, L. F. M. Modelling adhesive joints with cohesive zone models: effect of the cohesive law shape of the adhesive layer. International Journal of Adhesion and Adhesives [online]. 2013, 44, p.48-56 [accessed 2013-02-12]. ISSN 0143-7496. Available from: https://doi.org/10.1016/j.ijadhadh.2013.02.00 Go to original source...
    11. GOST 22690-2015. Concretes. Determination of strength by mechanical methods of nondestructive testing.
    12. GOST 18105-86. Concretes. Rules for the strength control.
    13. AZMEE, N. M., SHAFIG, N. Ultra-high performance concrete: from fundamental to applications. Case Studies in Construction Materials [online]. 2018, 9, p. 69-84 [accessed 2018-09-03]. ISSN 2214-5095. Available from: https://doi.org/10.1016/j.cscm.2018.e00197 Go to original source...
    14. JURKIEWIEZ B., TOUT, F., FERRIER, E. Push-out and bending tests of steel-concrete adhesively bonded composite elements. Engineering Structures [online]. 2021, 231, p. 327-345 [accessed 2020-12-08]. ISSN 0141-0296. Available from: https://doi.org/10.1016/j.engstruct.2020.111717 Go to original source...
    15. NASSER, A. N., MUAZZAM, G. S., RAMI A. H., JAMAL A. A., KAIS, D. Durability of reinforced concrete beams strengthened by galvanized steel mesh-epoxy systems under harsh environmental conditions. Composite Structures [online]. 2020, 249, p. 569-581 [accessed 2020-05-26]. ISSN 0263-8223. Available from: https://doi.org/10.1016/j.compstruct.2020.112547 Go to original source...
    16. ISMAIL, M. I. Q, PAYAM, S., MOHD, Z. J., AZIZ, I. A., ZAINAH, I., UBAGARAM, J. A. The use of wire mesh-epoxy composite for enhancing the flexural performance of concrete beams. Materials and Design [online]. 2014, 60, p. 250-259 [accessed 2014-03-31]. ISSN 0261-3069. Available from: https://doi.org/10.1016/j.matdes.2014.03.075 Go to original source...
    17. ISMAIL, M. I. Q, PAYAM, S., MOHD, Z. J. Flexural behaviour of RC beams strengthened with wire mesh-epoxy composite. Construction and Building Materials [online]. 2015, 79, p. 104-114 [accessed 2015-01-02]. ISSN 0950-0618. Available from: https://doi.org/10.1016/j.conbuildmat.2015.01.013 Go to original source...
    18. ASCIONE, F., GRANATA, L., GUADAGNO, L., NADDEO C. Hygrothermal durability of epoxy adhesives used in civil structural applications. Composite Structures [online]. 2021, 265, 113591 [accessed 2021-01-08]. ISSN 0263-8223. Available from: https://doi.org/10.1016/j.compstruct.2021.113591 Go to original source...
    19. SNiP 2.05.03-84*. Bridges and pipes.
    20. GOST 8829-94. Reinforced concrete and prefabricated concrete building products. Loading test methods. Assesment of strength, rigidity and crack resistance.
    21. BOUAZAOUI, L., JURKIEWIEZ, B., DELMAS, Y, LI, A. Static behaviour of a full-scale steel-concrete beam with epoxy-bonding connection. Engineering Structures [online]. 2008, 30, p. 1981-1990 [accessed 2007-12-19]. ISSN 0141-0296. Available from:https://doi.org/10.1016/j.engstruct.2007.12.018 Go to original source...
    22. ZHAO, W., YU, Y., XIE, Q. Nonuniform interface failure of steel-concrete composite structures bonded using epoxy resin mortar. Engineering Structures [online]. 2019, 184, p. 447-458 [accessed 2019-01-31]. ISSN 0141-0296. Available from: https://doi.org/10.1016/j.engstruct.2019.01.109 Go to original source...
    23. LARBI, A. S., FERRIER, E., JURKIEWIEZ, B., HAMELIN, P. Static behaviour of steel concrete beam connected by bonding. Engineering Structures [online]. 2007, 29(6), p. 1034-1042 [accessed 2006-06-12]. ISSN 0141-0296. Available from: https://doi.org/10.1016/j.engstruct.2006.06.015 Go to original source...
    24. JURKIEWIEZ, B., MEAUD, C., MICHEL, L. Non linear behaviour of steel-concrete epoxy bonded composite beams. Journal of Constructional Steel Research [online]. 2011, 67(3), p. 389-397 [accessed 2010-10-04]. ISSN 0143-974X. Available from: https://doi.org/10.1016/j.jcsr.2010.10.002 Go to original source...
    25. JURKIEWIEZ, B., MEAUD, C., FERRIER, E. Non-linear models for steel-concrete epoxy-bonded beams. Journal of Constructional Steel Research [online]. 2014, 100, p. 108-121 [accessed 2014-05-08]. ISSN 0143-974X. Available from: https://doi.org/10.1016/j.jcsr.2014.04.005 Go to original source...
    26. BUDZIK, M. K., JUMEL, J., BEN SALEM, N., SHANAHAN, M. E. R. Instrumented end notched flexure - crack propagation and process zone monitoring. Part II: Data reduction and experimental. International Journal of Solids and Structures [online]. 2013, 50(2), p. 310-319. ISSN 0020-7683. Available from: https://doi.org/10.1016/j.ijsolstr.2012.08.030 Go to original source...
    27. Sousa, J. M., CORREIA, J. R., CABRAL-FONSECA, S. Durability of an epoxy adhesive used in civil structural applications. Construction and Building Materials [online]. 2018, 161, p. 618-633 [accessed 2017-11-30]. ISSN 0950-0618. Available from: https://doi.org/10.1016/j.conbuildmat.2017.11.168 Go to original source...
    28. GAO, N., WANG, P., STEWART, L., ARSON, C. Finite element model of concrete repaired by High Molecular Weight Methacrylate (HMWM). Engineering Structures [online]. 2021, 233, 111860 [accessed 2021-01-03]. ISSN 0141-0296. Available from: https://doi.org/10.1016/j.engstruct.2021.111860 Go to original source...

    This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content