Communications - Scientific Letters of the University of Zilina 2022, 24(3):B189-B198 | DOI: 10.26552/com.C.2022.3.B189-B198

Ultrasonic Unit for Reducing the Toxicity of Diesel Vehicle Exhaust Gases

Adil Kadyrov ORCID...1, Bauyrzhan Sarsembekov ORCID...1, Alexandr Ganyukov ORCID...1,*, Shinpolat Suyunbaev ORCID...2, Kirill Sinelnikov ORCID...1
1 Karaganda Technical University, Kazakhstan
2 Tashkent State Transport University, Uzbekistan

The article presents materials on use of ultrasonic waves to reduce the smoke and toxicity of diesel engine exhaust gases. The results of the experiments are presented. The hypothesis on the reduction of smoke and toxicity of the exhaust gas due to the acceleration of the coagulation of its particles under the action of ultrasound has been confirmed.

Keywords: car, diesel engine, exhaust gases, ultrasonic installation, coagulation, gas analyzer, opacimeter

Received: November 25, 2021; Accepted: February 7, 2022; Prepublished online: April 19, 2022; Published: July 1, 2022  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Kadyrov, A., Sarsembekov, B., Ganyukov, A., Suyunbaev, S., & Sinelnikov, K. (2022). Ultrasonic Unit for Reducing the Toxicity of Diesel Vehicle Exhaust Gases. Communications - Scientific Letters of the University of Zilina24(3), B189-198. doi: 10.26552/com.C.2022.3.B189-B198
Download citation

References

  1. KORABLEV, R. A., BELOKUROV, V. P., ZELIKOV, V. A., LIKHACHEV, D. V., RAZGONYAEVA, V. V., BOYKO, N. I. Environmental safety of vehicles. Voronezh, 2011.
  2. KADYROVA, I. A., MINDUBAEVA, F. A., GRJIBOVSKI, A. M. Prediction of outcomes after stroke: a systematic review. Human Ecology [online]. 2015, 22(10), p. 55-64. ISSN 1728-0869. Available from: https://doi.org/10.33396/1728-0869-2015-10-55-64 Go to original source...
  3. KADYROV, A., GANYUKOV, A., PAK, I., SULEYEV, B., BALABEKOVA, K. Theoretical and experimental study of operation of the tank equipment for ultrasonic purification of the internal combustion engine exhaust gases. Communications - Scientific Letters of the University of Zilina [online]. 2021, 23(3), p. B219-B226. ISSN 1335-4205, eISSN 2585-7878. Available from: https://doi.org/10.26552/com.C.2021.3.B219-B226 Go to original source...
  4. KADYROV, A., SARSEMBEKOV, B., GANYUKOV, A., ZHUNUSBEKOVA, Z., ALIKARIMOV, K. Experimental research of the coagulation process of exhaust gases under the influence of ultrasound. Communications - Scientific Letters of the University of Zilina [online]. 2021, 23(4), p. B288-B298. ISSN 1335-4205, eISSN 2585-7878. Available from: https://doi.org/10.26552/com.C.2021.4.B288-B298 Go to original source...
  5. KADYROV, A., KARSAKOVA, A., DONENBAYEV, B., BALABEKOVA, K. Establishing the strength characteristics of the lifting-leveling device structures of the VPO-3-3000 machines for the track straightening. Communications - Scientific Letters of the University of Zilina [online]. 2020, 22(4), p. 70-79. ISSN 1335-4205, eISSN 2585-7878. Available from: https://doi.org/10.26552/com.C.2020.4.70-79 Go to original source...
  6. IBATOV, M. K., KADYROV, A. S., PAK, I. A., KADYROVA, I. A., ASKAROV, B. S. The results of experimental studies of the capacitive equipment of ultrasonic cleaning of exhaust gases of vehicles. Coal [online]. 2020, 2, p. 73-78. ISSN 0041-5790, eISSN 2412-8333. Available from: https://doi.org/10.18796/0041-5790-2020-2-73-78 Go to original source...
  7. KADYROV, A. S., KUNAEV, V. A., GEORGIADI, I. V. Prospects for processing of ferrous metallurgical waste based on Arcelormittal Temirtau experience. Metallurgist [online]. 2018, 62(1-2), p. 22-28. ISSN 0026-0894. Available from: https://doi.org /10.1007/s11015-018-0620-3 Go to original source...
  8. KADYROV, A. S., KUNAEV, V. A., GEORGIADI, I. V. Ferrous metallurgy waste and waste technical fluids for obtaining the material of road bases. Ecology and Industry of Russia [online]. 2017, 21(12), p. 44-48. ISSN 1816-0395, eISSN 2413-6042. Available from: https://doi.org /10.18412/1816-0395-2017-12-44-48 Go to original source...
  9. ZHUNUSBEKOVA, Z. Z., KADYROV, A. S. Study of digging machine flat element loading in clay solution. Scientific Bulletin of the National Maid University. 2016, 2, p. 30-33. ISSN 2071-2227.
  10. VARSHAVSKY, I. L., MALOV, R. V. How to neutralize car exhaust gases. Moscow: Transport, 1968.
  11. LOZHKIN, V. N., SHULGIN, V. V., MAKSIMOV, M. A. About modeling of systems for cleaning the exhaust gases of internal combustion engines using neutralizers and heat accumulators of the phase transition. Technical and Technological Problems of Service. 2011, 2(16) p. 42-47.
  12. SHAMIM, T. Effect of engine exhaust gas modulation on the cold start emissions. International Journal of Automotive Technology [online]. 2011, 12(4), p. 475-487. ISSN 1229-9138, eISSN 1976-3832. Available from: https://doi.org/10.1007/s12239-011-0056-2 Go to original source...
  13. BALDEV, R., RAJENDRAN, V., PALANICHAMI, P. Applications of ultrasound. Moscow: Technosphere, 2006. ISBN 5-94836-088-1.
  14. BERGMAN, L. Ultrasound and its application in science and technology. Moscow: Publishing house of foreign literature, 1957.
  15. Patent RK No. 3194. Device for ultrasonic cleaning of exhaust gases. Declared 12/20/2017, publ. 10/02/2018.
  16. KADYROV, A. S., PAK, I. A., KADYROVA, I. A., GANYUKOV, A. A. Physics of the process of ultrasonic coagulation of exhaust gases of internal combustion engines of motor vehicles. Bulletin of PSU. Energy series. 2020, 1, p. 219-230.
  17. IBATOV, M. K., KADYROV, A. S., PAK, I. A., KADYROVA, I. A., ASKAROV, B. S. The results of experimental studies of the operation of capacitive equipment for ultrasonic cleaning of exhaust gases from vehicles. Coal [online]. 2020, 2, p. 73-78. Available from: https://doi.org/10.18796 / 0041-5790-2020-2-73-78
  18. KADYROV, A., GANYUKOV, A., BALABEKOVA, K. Development of constructions of mobile road overpasses. MATEC Web of Conferences [online]. 2017, 108, 16002. ISSN 2261-236X. Available from: https://doi.org /10.1051/matecconf/201710816002 Go to original source...
  19. NASAD, T. G., SHEROV, K. T., ABSADYKOV, B. N., TUSUPOVA, S. O., SAGITOV, A. A., ABDUGALIYEVA, G. B., OKIMBAYEVA, A. E. Formation management in parts processing regenerated by surfacing. News of the National Academy of Sciences of the Republic of Kazakhstan, Series of Geology and Technical Sciences. 2019, 3(435), p. 102-108. Go to original source...
  20. BEREZYUK, V. G., KUZEMBAYEV, S. B., SHEROV, K. T., SIKHIMBAYEV, M. R., ALYZHANOV, M. K., MISHNEV, S. A., MAZDUBAY, A. B., GRINEVICH, I. I., SHEROV, A. K., SIKHIMBAYEVA, D. R. Increase of precision of casting blocks by applying acoustical oscillations in gas-impulsive moulding. Journal of Vibroengineering. 2015, 17(5), p. 2178-2186. ISSN 1392-8716, eISSN 2538-8460.

This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.