Communications - Scientific Letters of the University of Zilina 2022, 24(4):B275-B287 | DOI: 10.26552/com.C.2022.4.B275-B287

Studying the Process of the Internal Combustion Engine Exhaust Gas Purification by an Electric Pulse

Adil Kadyrov ORCID...1, Yevgeniy Kryuchkov ORCID...1, *, Kirill Sinelnikov ORCID...1, Alexandr Ganyukov ORCID...1, Rustem Sakhapov ORCID...2, Aliya Kukesheva ORCID...1
1 Abylkas Saginov Karaganda Technical University, Karaganda, Kazakhstan
2 Kazan State University of Architecture and Engineering, Kazan, Russia

The article deals with method of purifying the exhaust gases in an automobile muffler or other transport equipment using electrical pulses. Electrical pulses are formed between the two ring electrodes (anode and cathode) installed in series along the gas flow. The physical picture of the process is described. A mathematical model has been developed and studied. A deterministic relationship has been established between the engine volume, the number of the crankshaft revolutions, the electric field strength and the charge strength and dynamic viscosity of the gas. Experimental studies have been carried out. The goal of the experiment was to confirm the hypothesis of impact ionization of exhaust gases. The effectiveness of electrical pulse purification has been proven.

Keywords: transport equipment, vehicle, internal combustion engine, muffler, ionization, electrodes, exhaust gas purification
Grants and funding:

The authors received no financial support for the research, authorship, and/or publication of this article.

Conflicts of interest:

The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

Received: April 27, 2022; Revised: September 6, 2022; Accepted: August 15, 2022; Prepublished online: September 8, 2022; Published: October 26, 2022  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Kadyrov, A., Kryuchkov, Y., Sinelnikov, K., Ganyukov, A., Sakhapov, R., & Kukesheva, A. (2022). Studying the Process of the Internal Combustion Engine Exhaust Gas Purification by an Electric Pulse. Communications - Scientific Letters of the University of Zilina24(4), B275-287. doi: 10.26552/com.C.2022.4.B275-B287
Download citation

References

  1. KADYROVA, I. A., MINDUBAEVA, F. A., GRJIBOVSKI, A. M. Prediction of outcomes after stroke: a systematic review. Human Ecology. 2015, 2015(10), р. 55-64. ISSN 1728-0869. Go to original source...
  2. KADYROV, A., GANYUKOV, A., PAK, I., SULEYEV, B., BALABEKOVA, K. Theoretical and experimental study of operation of the tank equipment for ultrasonic purification of the internal combustion engine exhaust gases. Communications - Scientific Letters of the University of Zilina [online]. 2021, 23(3), p. B219-B226. ISSN 1335-4205, eISSN 2585-7878. Available from: https://doi.org/10.26552/com.C.2021.3.B219-B226 Go to original source...
  3. KADYROV, A. S., AMANGELDIYEV, N. E. New specifications of the theory of ground cutting. Periodico Tche Quimica. 2019, 16(31), p. 922-936. ISSN 1806-0374. Go to original source...
  4. IBATOV, M. K., KADYROV, A. S., PAK, I. A., KADYROVA, I. A., ASKAROV, B. S. The results of experimental studies of the capacitive equipment of ultrasonic cleaning of exhaust gases of vehicles. Ugol / Coal [online]. 2020, 2, p. 73-78. ISSN 0041-5790. Available from: https://doi.org/10.18796/0041-5790-2020-2-73-78 Go to original source...
  5. KADYROV, A., GANYUKOV, A., IMANOV, M., BALABEKOVA, K. Calculation of constructive elements of mobile overpass. Current Science [online]. 2019, 116(9), p. 1544-1550. ISSN 0011-3891. Available from: https://doi.org/10.18520/cs/v116/i9/1544-1550 Go to original source...
  6. KADYROV, A., KUNAEV, V., GEORGIADI, I., KHAIBULLIN, R. Advanced methods for solving the problems of road construction in central Kazakhstan. Tehnicki Vjesnik - Technical Gazette [online]. 2019, 26(4), p. 1159-1163. ISSN 1330-3651. Available from: https://doi.org/10.17559/TV-20170225144013 Go to original source...
  7. KADYROV, A., SARSEMBEKOV, B., GANYUKOV, A., ZHUNUSBEKOVA, Z., ALIKARIMOV, K. Experimental research of the coagulation process of exhaust gases under the influence of ultrasound. Communications - Scientific Letters of the University of Zilina [online]. 2021, 23(4), p. B288-B298. ISSN 1335-4205, eISSN 2585-7878. Available from: https://doi.org/10.26552/com.C.2021.4.B288-B298 Go to original source...
  8. KADYROV, A. S., KUNAYEV, V. A., GEORGIADI, I. V. Prospects for processing of ferrous metallurgical waste based on ArcelorMittal Temirtau experience. Metallurgist [online]. 2018, 62(1-2), p. 22-28. ISSN 0026-0894. Available from: https://doi.org/10.1007/s11015-018-0620-3 Go to original source...
  9. GANYUKOV, A., KADYROV, A., BALABEKOVA, K., KURMASHEVA, B. Tests and calculations of structural elements of temporary bridges / Badania i obliczenia elementów konstrukcyjnych mostów tymczasowych (in Polish). Roads and Bridges / Drogi i Mosty [online]. 2018, 17(3), p. 215-226. ISSN1643-1618. Available from: https://doi.org/10.7409/rabdim.018.014 Go to original source...
  10. KADYROV, A. S., KUNAYEV, V. A., GEORGIADI, I. V. Ferrous metallurgy waste and waste technical fluids for obtaining the material of road bases. Ecology and Industry of Russia [online]. 2017, 21(12), p. 44-48. ISSN 1816-0395. Available from: https://doi.org/10.18412/1816-0395-2017-12-44-48 Go to original source...
  11. Patent of USSR №1404664. Method for cleaning exhaust gases of an internal combustion engine. 1985
  12. Patent of Russian Federation №2398328. Gas ionization method. 2008
  13. Patent of USSR №1470985. Method for neutralizing exhaust gases of an internal combustion engine and a device for its implementation. 1986
  14. Patent of Russian Federation №2132471. Method for reducing the toxicity of exhaust gases of an internal combustion engine and a device for its implementation. 1999
  15. KADYROV, A., BALABEKOVA, K., GANYUKOV, A., AKHMEDIYEV, S. The constructive solution and calculation of elements of the unified module of the mobile bridge overcrossing. Transport Problems [online]. 2017, 12(3), p. 59-69. ISSN 1896-0596. Available from: https://doi.org/10.20858/tp.2017.12.3.6 Go to original source...
  16. KADYROVA, I. A., KADYROV, A. S. Alterations of serum neurospecific proteins concentrations in patients with metabolic syndrome. Journal of Neurology and Psychiatry named after S. S. Korsakov [online]. 2016, 116(11), p. 92-97. ISSN 1997-7298. Available from: https://doi.org/10.17116/jnevro201611611192-97 Go to original source...
  17. ZHUNUSBEKOVA, Z. Z., KADYROV, A. S. Study of digging machine flat element loading in clay solution. Scientific Bulletin of National Hirnichoho University. 2016, 2, p. 30-33. ISSN 2071-2227.
  18. Patent of the Republic of Kazakhstan No. 3194. Device for ultrasonic purification of exhaust. 2018.
  19. KADYROV, A. S., PAK, I. A., KADYROVA, I. A., GANYUKOV, A. A. Physics of the process of ultrasonic coagulation of exhaust gases of internal combustion engines of motor vehicles. Bulletin of PSU. Energy Series. 2020, 1, p. 219-230. ISSN 1811-1858.
  20. KADYROV, A., PAK, I., GANYUKOV, A., IMANOV, M., BALABEKOVA, K. Research of operation of equipment for ultrasonic purification of exhaust gases of internal combustion engines. Journal of Engineering Physics and Thermophysics [online]. 2021, 94(6), p. 1407-1414. ISSN 1062-0125, eISSN 1573-871X. Available from: https://doi.org/10.1007/s10891-021-02447-x Go to original source...
  21. KADYROV, A., GANYUKOV, A., BALABEKOVA, K. Development of constructions of mobile road overpasses. MATEC Web of Conferences [online]. 2017, 108, 16002. eISSN 2261-236X. Available from: https://doi.org/10.1051/matecconf/201710816002 Go to original source...
  22. KHODZHIBERGENOV, D. T., ESIRKEPOV, A., SHEROV, K. T. Rational milling of metals. Russian Engineering Research. 2015, 35(1), p. 43-45. ISSN 1068-798X. Go to original source...
  23. NASAD, T. G., SHEROV, K. T., ABSADYKOV, B. N., TUSUPOVA, S. O., SAGITOV, A. A. ABDUGALIYEVA, G. B., OKIMBAYEVA, A. E. Formation management in parts processing regenerated by surfacing. News of the National Academy of Sciences of the Republic of Kazakhstan, Series of Geology and Technical Sciences. 2019, 3(435), p. 102-108. eISSN 2518-170X. Go to original source...
  24. KADYROV, A., KARSAKOVA, A., DONENBAYEV, B., BALABEKOVA, K. Establishing the strength characteristics of the lifting-leveling device structures of the VPO-3-3000 machines for the track straightening. Communications - Scientific Letters of the University of Zilina [online]. 2020, 22(4), p. 70-79. ISSN 1335-4205, eISSN 2585-7878. Available from: [2] https://doi.org/10.26552/com.C.2020.4.70-79 Go to original source...
  25. IBATOV, M. K., KADYROV, A. S., PAK, I. A., KADYROVA, I. A., ASKAROV, B. S. Results of experimental studies of the operation of capacitive equipment for ultrasonic cleaning of vehicle exhaust gases. Ugol / Coal [online]. 2020, 2, p. 73-78. ISSN 0041-5790. Available from: https://doi.org/10.18796/0041-5790-2020-2-73-78 Go to original source...
  26. KADYROV, A., ZHUNUSBEKOVA, Z., GANYUKOV, A., KADYROVA, I., KUKESHEVA, A. General characteristics for loading the working elements of drilling and milling machines when moving in the clay solution. Communications - Scientific Letters of the University of Zilina [online]. 2021, 23(2), p. B97-B105. ISSN 1335-4205, eISSN 2585-7878. Available from: https://doi.org/10.26552/com.C.2021.2.B97-B105 Go to original source...

This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.