Communications - Scientific Letters of the University of Zilina 2023, 25(2):B62-B76 | DOI: 10.26552/com.C.2023.022

Development of the Universal Working Equipment of the Excavator for Preparation of Materials Based on Waste during the Road Building

Ivan Georgiadi ORCID...1, Adil Kadyrov ORCID...1, Vyacheslav Kunaev ORCID...2, *
1 Abylkas Saginov Karaganda Technical University, Karaganda, Kazakhstan
2 Karaganda Industrial University, Temirtau, Kazakhstan

The article proposes a technological line for recycling the blast-furnace slag. This line makes it possible to obtain the crushed stone for road building, which has high water and frost resistance. The design of replaceable working equipment of a single-bucket excavator, with replaceable working tools for loosening frozen slag in dumps and preparing it for use in road building, is proposed. The results of testing the manufactured replacement working equipment are presented. The results of mathematical processing of experimental data using the approximation method are presented, as well.

Keywords: loosening of frozen grounds, waste recycling, blast-furnace slag, single-bucket excavator, working equipment, working tool, excavation machines
Grants and funding:

The authors received no financial support for the research, authorship and/or publication of this article.

Conflicts of interest:

The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

Received: November 8, 2022; Accepted: January 9, 2023; Prepublished online: January 27, 2023; Published: April 6, 2023  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Georgiadi, I., Kadyrov, A., & Kunaev, V. (2023). Development of the Universal Working Equipment of the Excavator for Preparation of Materials Based on Waste during the Road Building. Communications - Scientific Letters of the University of Zilina, 25(2), B62-76. doi: 10.26552/com.C.2023.022
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. BREZINA, I., MACHEL, O., ZAVREL, T. Temperature correction of deflections and backcalculated elasticity moduli determined from falling weight deflectometer measurements on asphalt pavements. Communications - Scientific Letters of the University of Zilina [online]. 2022, 24(1), p. D1-D8. ISSN 1335-4205, eISSN 2585-7878. Available from: https://doi.org/10.26552/COM.C.2022.1.D1-D8 Go to original source...
    2. MORAVCIK, M. Dynamic response of a road bridge subjected to passing a heavy vehicle over a standard irregularity - numerical modelling and experimental testing. Communications - Scientific Letters of the University of Zilina [online]. 2022, 24(1), p. D37-D45. ISSN 1335-4205, eISSN 2585-7878. Available from: https://doi.org/10.26552/COM.C.2022.1.D37-D45 Go to original source...
    3. SYSYN, M., KOVALCHUK, V., GERBER, U., NABOCHENKO, O., PARNETA, B. Laboratory evaluation of railway ballast consolidation by the non-destructive testing. Communications - Scientific Letters of the University of Zilina [online]. 2019, 21(2), p. 81-88. ISSN 1335-4205, eISSN 2585-7878. Available from: https://doi.org/10.26552/com.C.2019.2.81-88 Go to original source...
    4. KADYROV, A., GANYUKOV, A., IMANOV, M., BALABEKOVA, K. Calculation of constructive elements of mobile overpass. Current Science [online]. 2019, 116(9), p. 1544-1550. ISSN 0011-3891. Available from: https://doi.org/10.18520/cs/v116/i9/1544-1550 Go to original source...
    5. GANYUKOV, A., KADYROV, A., BALABEKOVA, K., KURMASHEVA, B. Tests and calculations of structural elements of temporary bridges / Badania i obliczenia elementów konstrukcyjnych mostów tymczasowych (in Polish). Roads and Bridges / Drogi i Mosty [online]. 2018, 17(3), p. 215-226. ISSN 1643-1618. Available from: https://doi.org/10.7409/rabdim.018.014 Go to original source...
    6. ABDULLAYEV, S. S., BONDAR, I. S., BAKYT, G. B., ASHIRBAYEV, G. K., BUDIUKIN, A. M., BAUBEKOV, Y. Y. Interaction of frame structures with rolling stock. News of the National Academy of Sciences of the Republic of Kazakhstan, Series of Geology and Technical Sciences [online]. 2021, 1(445), p. 22-28. ISSN 2224-5278. Available from: https://doi.org/10.32014/2021.2518-170X.3 Go to original source...
    7. KADYROV, A., GANYUKOV, A., BALABEKOVA, K. Development of constructions of mobile road overpasses. MATEC Web of Conferences [online]. 2017, 108, 16002. eISSN 2261-236X. Available from: https://doi.org/10.1051/matecconf/201710816002 Go to original source...
    8. KADYROV, A., KUNAEV, V., GEORGIADI, I., KHAIBULLIN, R. Advanced methods for solving the problems of road construction in central Kazakhstan. Tehnicki Vjesnik [online]. 2019, 26(4), p. 1159-1163. ISSN 1330-3651. Available from: https://doi.org/10.17559/TV-20170225144013 Go to original source...
    9. BIELIATYNSKYI, A., YANG, S., PERSHAKOV, V., SHAO, M., TA, M. Features of the hot recycling method used to repair asphalt concrete pavements. Materials Science-Poland [online]. 2022, 40(2), p. 181-195. eISSN 2083-134X. Available from: https://doi.org/10.2478/msp-2022-0021 Go to original source...
    10. KADYROV, A. S., KUNAEV, V. A., GEORGIADI, I. V. Prospects for processing of ferrous metallurgical waste based on ArcelorMittal Temirtau experience. Metallurgist [online]. 2018, 62(1-2), p. 22-28. ISSN 0026-0894. Available from: https://doi.org/10.1007/s11015-018-0620-3 Go to original source...
    11. KADYROV, A. S., KUNAEV, V. A., GEORGIADI, I. V. Ferrous metallurgy waste and waste technical fluids for obtaining the material of road bases. Ecology and Industry of Russia [online]. 2017, 21(12), p. 44-48. ISSN 1816-0395. Available from: https://doi.org/10.18412/1816-0395-2017-12-44-48 Go to original source...
    12. KOSTENKO, S. A., PISKUNOV, A. A., GANIN, N. A., EMELIANOVA, G. A. Energy-Saving Thermal Stabilization System and Assessment of Temperature Loadings of a Bridge Deck Pavement. Communications - Scientific letters of the University of Zilina [online]. 2022, 24(3), p. D141-149. ISSN 1335-4205, eISSN 2585-7878. Available from: https://doi.org/10.26552/com.C.2022.3.D141-D149 Go to original source...
    13. CHEN, W., LI, Y., CHEN, S., ZHENG, C. Properties and economics evaluation of utilization of oil shale waste as an alternative environmentally-friendly building materials in pavement engineering. Construction and Building Materials [online]. 2020, 259, 119698. ISSN 0950-0618. Available from: https://doi.org/10.1016/j.conbuildmat.2020.119698 Go to original source...
    14. ALWETAISHI, M., KAMEL, M., AL-BUSTAMI, N. Sustainable applications of asphalt mixes with reclaimed asphalt pavement (RAP) materials: innovative and new building brick. International Journal of Low-Carbon Technologies [online]. 2019, 14(3), p. 364-374. ISSN 1748-1317. Available from: https://doi.org/10.1093/ijlct/ctz023 Go to original source...
    15. CONG, L., YANG, F., GUO, G., REN, M., SHI, J., TAN, L. The use of polyurethane for asphalt pavement engineering applications: a state-of-the-art review. Construction and Building Materials [online]. 2019, 225, p. 1012-1025. ISSN 0950-0618. Available from: https://doi.org/10.1016/j.conbuildmat.2019.07.213 Go to original source...
    16. ZHU, J., MA, T., FAN, J., FANG, Z., CHEN, T., ZHOU, Y. Experimental study of high modulus asphalt mixture containing reclaimed asphalt pavement. Journal of Cleaner Production [online]. 2020, 263, 121447. ISSN 0959-6526. Available from: https://doi.org/10.1016/j.jclepro.2020.121447 Go to original source...
    17. WU, S., MONTALVO, L. Repurposing waste plastics into cleaner asphalt pavement materials: a critical literature review. Journal of Cleaner Production [online]. 2021, 280, 124355. ISSN 0959-6526. Available from: https://doi.org/10.1016/j.jclepro.2020.124355 Go to original source...
    18. BRESSI, S., FIORENTINI, N., HUANG, J., LOSA, M. Crumb rubber modifier in road asphalt pavements: state of the art and statistics. Coatings [online]. 2019, 9(6), 384. ISSN 2079-6412. Available from: https://doi.org/10.3390/COATINGS9060384 Go to original source...
    19. SORMUNEN, P., KARKI, T. Recycled construction and demolition waste as a possible source of materials for composite manufacturing. Journal of Building Engineering [online]. 2019, 24, 100742. ISSN 2352-7102. https://doi.org/10.1016/j.jobe.2019.100742 Go to original source...
    20. CHEN, S., LIN, W., LIN, K., HUANG, P. A study on the mixed properties of green controlled low strength cementitious. Materials Science-Poland [online]. 2021, 39(1), p. 59-74. eISSN 2083-134X. Available from: https://doi.org/10.2478/msp-2021-0004 Go to original source...
    21. MAGBOOL, H., ZEYAD, A. The effect of varied types of steel fibers on the performance of self-compacting concrete modified with volcanic pumice powder. Materials Science-Poland [online]. 2021, 39(2), p. 172-187. eISSN 2083-134X. Available from: https://doi.org/10.2478/msp-2021-0016 Go to original source...
    22. HUNG, C., LIN, W., YEIH, W., CHANG, J. Delayed setting time for alkali-activated slag composites using activator containing SiO2 and Na2O. Materials Science-Poland [online]. 2021, 39(4), p. 570-579. eISSN 2083-134X. Available from: https://doi.org/10.2478/msp-2021-0045 Go to original source...
    23. LI, W., HUANG, X., ZHAO, J., HUANG, Y., SHUMUYE, E., YANG, X. Effect of sea sand and recycled aggregate replacement on fly ash/slag-based geopolymer concrete. Materials Science-Poland [online]. 2021, 39(4), p. 580-598. eISSN 2083-134X. Available from: https://doi.org/10.2478/msp-2021-0049 Go to original source...
    24. WARIS, M., US SAHAR, U., AKMAL, U., KHURRAM, N., ASLAM, F., FATHI, D. Coupled effect of waste tire rubber and steel fibers on the mechanical properties of concrete. Materials Science-Poland [online]. 2022, 40(1), p. 49-59. eISSN 2083-134X. Available from: https://doi.org/10.2478/msp-2022-0009 Go to original source...
    25. TCHEKWAGEP, J., ZHAO, P., WANG, S., HUANG, S., CHENG, X. The impact of changes in pore structure on the compressive strength of sulphoaluminate cement concrete at high temperature. Materials Science-Poland [online]. 2021, 39(1), p. 75-85. eISSN 2083-134X. Available from: https://doi.org/10.2478/msp-2021-0006 Go to original source...
    26. VAISMAN, Y. I., PUGIN, K. G., RUDAKOVA, L. V., GLUSHANKOVA, I. S., TYURYUKHANOV, K. Y. Production of environmentally safe building materials on the basis of the waste foundry sand. Theoretical and Applied Ecology [online]. 2018, 3, p. 109-115. ISSN 1995-4301. Available from: https://doi.org/10.25750/1995-4301-2018-3-109-115 Go to original source...
    27. ROMANOVA, O. A., SIROTIN, D. V. Environmental and economic efficiency of recycling industrial waste in the Urals. Economy of Region [online]. 2021, 17(1), p. 59-71. ISSN 2072-6414. Available from: https://doi.org/10.17059/EKON.REG.2021-1-5 Go to original source...
    28. AHN, B., LEE, S., PARK, C. Physical and mechanical properties of rural-road pavement concrete in South Korea containing air-cooled blast-furnace slag aggregates. Applied Sciences (Switzerland) [online]. 2021, 11(12), 5645. ISSN 2076-3417. Available from: https://doi.org/10.3390/app11125645 Go to original source...
    29. AMULYA, S., RAVI SHANKAR, A. U. Replacement of conventional base course with stabilized lateritic soil using ground granulated blast furnace slag and alkali solution in the flexible pavement construction. Indian Geotechnical Journal [online]. 2020, 50(2), p. 276-288. ISSN 0971-9555. Available from: https://doi:10.1007/s40098-020-00426-2 Go to original source...
    30. LOPEZ-DIAZ, A., OCHOA-DIAZ, R., GRIMALDO-LEON, G. E. Use of BOF slag and blast furnace dust in asphalt concrete: An alternative for the construction of pavements. DYNA (Colombia) [online]. 2018, 85(206), p. 24-30. ISSN 0012-7353. Available from: https://doi:10.15446/dyna.v85n206.70404 Go to original source...
    31. GEL'MANOVA, Z. S., FILATOV, A. V. Projects for making efficient use of factory wastes to reduce the load on the environment. Metallurgist [online]. 2016, 59(9-10), p. 747-751. ISSN 0026-0894. Available from: https://doi:10.1007/s11015-016-0169-y Go to original source...
    32. HASAN, U., WHYTE, A., AL JASSMI, H. Life cycle assessment of roadworks in united arab emirates: Recycled construction waste, reclaimed asphalt pavement, warm-mix asphalt and blast furnace slag use against traditional approach. Journal of Cleaner Production [online]. 2020, 257, 120531. ISSN 0959-6526. Available from: https://doi:10.1016/j.jclepro.2020.120531 Go to original source...
    33. PASETTO, M., BALIELLO, A., GIACOMELLO, G., PASQUINI, E. Sustainable solutions for road pavements: A multi-scale characterization of warm mix asphalts containing steel slags. Journal of Cleaner Production [online]. 2017, 166, p. 835-843. ISSN 0959-6526. Available from: https://doi:10.1016/j.jclepro.2017.07.212 Go to original source...
    34. PHUMMIPHAN, I., HORPIBULSUK, S., RACHAN, R., ARULRAJAH, A., SHEN, S., CHINDAPRASIRT, P. High calcium fly ash geopolymer stabilized lateritic soil and granulated blast furnace slag blends as a pavement base material. Journal of Hazardous Materials [online]. 2018, 341, p. 257-267. ISSN 0304-3894. Available from: https://doi:10.1016/j.jhazmat.2017.07.067 Go to original source...
    35. GURUPRASAD, H. C., SRIDHAR, R., RAVI, K. R. Effect of using ground granulated blast furnace slag in rigid pavement overlays. Materials Science Forum Vols. [online]. 2022, 1048. p. 396-402. ISSN 0255-5476. Available from: https://doi:10.4028/www.scientific.net/MSF.1048.396 Go to original source...
    36. AKHMETOVA, G. E., ULYEVA, G. A., TUYSKHAN, K. On the issue of alloying and modification of alloys: Using the waste products for creation of novel materials. Progress in Physics of Metals [online]. 2021, 22(2), p. 271-289. ISSN 1608-1021. Available from: https://doi.org/10.15407/ufm.22.02.271 Go to original source...
    37. ASAINOVA, D. A., MERKULOV, V. V., AKHMETOVA, G. E., ULYEVA, G. A. Secondary processing of metallurgical production waste to obtain refractory materials. Inorganic Materials: Applied Research [online]. 2021, 12(4), p. 1066-1069. ISSN 2075-1133. Available from: https://doi.org/10.1134/S2075113321040031 Go to original source...
    38. AKHMETOVA, G. E., ULYEVA, G. A., DENISSOVA, A. I., TUYSKHAN, K., TULEGENOV, A. B. State-of-the-art and analysis of characteristics, properties, significance and application prospects of metallurgical slags. Progress in Physics of Metals [online]. 2021, 23(1), p. 108-129. ISSN 2075-1133. Available from: https://doi.org/10.15407/ufm.23.01.108 Go to original source...
    39. KUNAEV, V. A. Determination of parameters of means of mechanization and technological process of hydrophobization of slag crushed stone: diss. PhD thesis. Karaganda: KarTU, 2018.
    40. BALOVNEV V. I. Analysis of the duration of the workflow when optimizing the parameters of earthmoving machines / Analiz prodolzhitelnosti rabochego processa pri optimizacii parametrov zemlerojnyh mashin (in Russian). Mechanization of Construction / Mekhanizaciya stroitelstva [online]. 2011, 10, p. 17-18. ISSN 0025-8903.
    41. ZHUNUSBEKOVA, Z. Z., KADYROV, A. S. Study of digging machine flat element loading in clay solution. Scientific Bulletin of National Hirnichoho University. 2016, 2, p. 30-33. ISSN 2071-2227.
    42. KADYROV, A., ZHUNUSBEKOVA, Z., GANYUKOV, A., KADYROVA, I., KUKESHEVA, A. General characteristics for loading the working elements of drilling and milling machines when moving in the clay solution. Communications - Scientific Letters of the University of Zilina [online]. 2021, 23(2), p. B97-B105. ISSN 1335-4205, eISSN 2585-7878. Available from: https://doi.org/10.26552/com.C.2021.2.B97-B105 Go to original source...
    43. KADYROV, A. S., AMANGELDIYEV, N. E. New specifications of the theory of ground cutting. Periodico Tche Quimica. 2019, 16(31), p. 922-936. ISSN 1806-0374. Go to original source...
    44. KULGILDINOV, M., KAUKAROV, A., KAMZANOV, N., TARAN M., KULGILDINOV, B., ZHAUYT, A. Determination of kinematic and force parameters of the special bucket shovel for the development of large-block soils. International Journal of Mechanical Engineering and Robotics Research [online]. 2020, 9(6), p. 813-824. ISSN 2278-0149. Available from: https://doi.org/10.18178/ijmerr Go to original source...
    45. EGLI, P., GASCHEN, D., KERSCHER, S., JUD, D., HUTTER, M. Soil-adaptive excavation using reinforcement learning. IEEE Robotics and Automation Letters [online]. 2022, 7(4), p. 9778-9785. ISSN 2377-3766. Available from: https://doi.org/10.1109/LRA.2022.3189834 Go to original source...
    46. KADYROV A. S., UNAIBAYEV B. Z., KURMASHEVA B. K. Theory of pre-project designing. On the example of excavation machines, Karaganda: Sanat, 2008. ISBN 9789965383939.
    47. DYAKOV, I., IVKIN, V., POPOVICH, A. A. Soil loosening machine for winter earth-moving in transport construction. Transport [online]. 2007, 22(4), p. 316-319. ISSN 1648-4142. Available from: https://doi:10.1080/16484142.2007.9638148 Go to original source...
    48. ILYUKHIN, A. V., MARSOV, V. I., MARSOVA, E. V., SYETINA, T. A., DZHABRAILOV, K. A. Improving the efficiency of frozen soils excavation using high-frequency vibration. IOP Conference Series: Materials Science and Engineering [online]. 2019, 643(1), 012102. ISSN 1757-8981. Available from: https://doi.org/10.1088/1757-899X/643/1/012102 Go to original source...
    49. MARTYUCHENKO, I. G., ZENIN, M. I., KOLESNIKOV, A. Y., IVANOV, S. V. Drilling tool for frozen ground. Gornyi Zhurnal [online]. 2022, 3, p. 49-53. ISSN 0017-2278. Available from: https://doi.org/10.17580/gzh.2022.03.07 Go to original source...
    50. LETOPOLSKY, A. B., KORCHAGIN, P. A., TETERINA, I. A. Working equipment of the single-bucket excavator for the development of frozen ground. IOP Conference Series: Materials Science and Engineering [online]. 2020, 709(4), 044027. ISSN 1757-8981. Available from: https://doi.org/10.1088/1757-899X/709/4/044027 Go to original source...
    51. GELMANOVA, Z., PAK, O., SIVYAKOVA, G., ZHABALOVA, G., LELIKOVA, O., ONISCHENKO, O. The scenario of development of electric power industry in the Republic of Kazakhstan. E3S Web of Conferences [online]. 2019, 124, 04002. ISBN 2555-0403. Available from: https://doi.org/10.1051/e3sconf/201912404002 Go to original source...

    This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content