Communications - Scientific Letters of the University of Zilina 2024, 26(2):B72-B79 | DOI: 10.26552/com.C.2024.016

Peculiarities of Designing the Frame of a Universal Container Made of Rectangular Pipes

Juraj Gerlici ORCID...1, Alyona Lovska ORCID...1, *, Mykhailo Pavliuchenkov ORCID...2, Oleksandr Kravchenko ORCID...1
1 University of Zilina, Zilina, Slovak Republic
2 Ukrainian State University оf Railway Transport, Kharkiv, Ukraine

The features of designing the frame of a universal container made of square pipes are presented in this paper. The two frame loading schemes are taken into account: the effect of vertical loading on the container frame when it is lifted by the upper corner fittings (I loading mode); the effect of longitudinal loading on the frame during transportation by the rail transport (II loading mode). Mathematical modeling was performed to determine the longitudinal loading acting on the container in the II loading mode. The determined acceleration is taken into account when constructing the schemes of force factors that arise in the frame. The strength of the frame was calculated using the finite element method, which was implemented in SolidWorks Simulation. The conducted research could contribute to creation of recommendations and developments regarding the design of modern structures of modular vehicles.

Keywords: container, container frame, container loading, container strength, container transportation
Grants and funding:

This publication was prepared thanks to support from the Cultural and Educational Grant Agency of the Ministry of Education of the Slovak Republic in the project KEGA 031ZU-4/2023: Development of key competencies of the graduate of the study program Vehicles and Engines; from the Slovak Research and Development Agency of the Ministry of Education, Science, Research and Sport in the project and VEGA 1/0513/22 “Investigation of the properties of railway brake components in simulated operating conditions on a flywheel brake stand; funding by the EU NextGenerationEU through the Recovery and Resilience Plan for Slovakia under the project No. 09I03-03-V01-00131; Funding by the EU NextGenerationEU through the Recovery and Resilience Plan for Slovakia under the project No. 09I03-03-V01-00129.

Conflicts of interest:

The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

Received: November 10, 2023; Accepted: January 10, 2024; Prepublished online: January 26, 2024; Published: April 2, 2024  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Gerlici, J., Lovska, A., Pavliuchenkov, M., & Kravchenko, O. (2024). Peculiarities of Designing the Frame of a Universal Container Made of Rectangular Pipes. Communications - Scientific Letters of the University of Zilina, 26(2), B72-79. doi: 10.26552/com.C.2024.016
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. DIZO, J., HARUSINEC, J., BLATNICKY, M. Structural analysis of a modified freight wagon bogie frame. MATEC Web of Conferences [online]. 2017, 134, 00010. eISSN 2261-236X. Available from: https://doi.org/10.1051/matecconf/201713400010 Go to original source...
    2. DIZO, J., HARUSINEC, J., BLATNICKY, M. Computation of modal properties of two types of freight wagon bogie frames using the finite element method. Manufacturing Technology [online]. 2018, 18(2), p. 208-214. ISSN 1213-2489, eISSN 2787-9402. Available from: https://doi.org/10.21062/ujep/79.2018/a/1213-2489/MT/18/2/208 Go to original source...
    3. SOUKUP, J., SKOSILAS, J., SKOSILASOVA, B., DIZO, J. Vertical vibration of two axle railway vehicle. Procedia Engineering [online]. 2017, 177, p. 25-32. ISSN 1877-7058. Available from: https://doi.org/10.1016/j.proeng.2017.02.178 Go to original source...
    4. RZECZYCKI, A., WISNICKI, B. Strength analysis of shipping container floor with gooseneck tunnel under heavy cargo load. Solid State Phenomena [online]. 2016, 252, p. 81-90. ISSN 1662-9779. Available from: https://doi.org/10.4028/www.scientific.net/SSP.252.81 Go to original source...
    5. NIKITCHENKO, A., ARTIUKH, V., SHEVCHENKO, D., PRAKASH, R. Evaluation of Interaction Between Flat Wagons and Container at Dynamic Coupling of Flat Wagons. MATEC Web of Conferences [online]. 2016, 7, 04008. eISSN 2261-236X. Available from: https://doi.org/10.1051/matecconf/20167304008 Go to original source...
    6. IBRAGIMOV, N., RAKHIMOV, R., KHADZHIMUKHAMEDOVA, M. Development of a container design for the transportation of fruits and vegetables (in Russian). Young Scientist [online]. 2015, 21(101), p. 168 - 173. ISSN 2072-0297, eISSN 2077-8295.
    7. KHADJIMUKHAMETOVA, M. A., MERGANOV, A. M. Development of the design and conditions of operation of containers for transportation of fruit and vegetable products international. Journal of Recent Technology and Engineering (IJRTE) [online]. 2020, 8(5), p. 2277-3878. eISSN 2277-3878. Available from: https://doi.org/10.35940/ijrte.E4856.018520 Go to original source...
    8. GIRIUNAS, K., SEZEN, H., DUPAIX, R. B. Evaluation, modeling, and analysis of shipping container building structures. Engineering Structures [online]. 2012, 43, p. 48-57. ISSN 0141-0296, eISSN 1873-7323. Available from: https://doi.org/10.1016/j.engstruct.2012.05.001 Go to original source...
    9. VATULIA, G., LOVSKA, A., MYAMLIN, S., STANOVSKA, I., HOLOFIEIEVA, M., HOROBETS, V., NERUBATSKYI, V., KRASNOKUTSKYI, Y. Revealing the effect of structural components made of sandwich panels on loading the container transported by railroad. Eastern-European Journal of Enterprise Technologies [online]. 2023, 1/7(121), p. 48-56. ISSN 1729-3774, eISSN 1729-4061. Available from: https://doi.org/10.15587/1729-4061.2023.272316 Go to original source...
    10. VATULIA, G., LOVSKA, A., KRASNOKUTSKY. Y. Research into the transverse loading of the container with sandwich-panel walls when transported by rail. IOP Conference Series: Earth and Environmental Science [online]. 2023, 1254, 012140. ISSN 1755-1315. Available from: https://doi.org/10.1088/1755-1315/1254/1/012140 Go to original source...
    11. MISHUTA, D. ALGIN, V., MIKHAILOV, V. Assessment of the stress-strain state of a container body of variable volume. Bulletin of the Belarusian-Russian University. 2012, 4(37), p. 61-68. ISSN 2077-8481. Go to original source...
    12. EREMIN, V., SEMENNIKOVA, L. Study of the stress-strain state of a container body using the WinMachine automated workplace software package. CAD and Graphics. 2004, 7, p. 23-28. ISSN 1211-1082.
    13. TIERNAN, S., FAHY, M. Dynamic FEA modelling of ISO tank containers. Journal of Materials Processing Technology [online]. 2002, 124(1-2), p. 126-132. ISSN 0924-0136, eISSN 1873-4774. Available from: https://doi.org/10.1016/S0924-0136(02)00196-6 Go to original source...
    14. DSTU 8940:2019. Steel profile pipes. Specifications. Kyiv, Ukraine: State Standard of Ukraine, 2019.
    15. BARABASH, M., SOROKA M., SURIANINOV, M. Nonlinear structural mechanics with LIRA-SAPR. Odessa: Ekolohiia, 2018. ISBN 978-617-7046-48-5.
    16. PANCHENKO, S., GERLICI, J., VATULIA, G., LOVSKA, A., PAVLIUCHENKOV, M., KRAVCHENKO, K. The analysis of the loading and the strength of the FLAT RACK removable module with viscoelastic bonds in the fittings. Applied Sciences [online]. 2023, 13(1), 79. eISSN 2076-3417. Available from: https://doi.org/10.3390/app13010079 Go to original source...
    17. DSTU 7598:2014. Freight wagons. General requirements for calculations and design of new and modernized wagons of 1520 mm track (non-self-propelled). Kiev, Ukraine: UkrNDNTS, 2015.
    18. LOVSKAYA, A. Assessment of dynamic efforts to bodies of wagons at transportation with railway ferries. Eastern-European Journal of Enterprise Technologies [online]. 2014, 3(4), p. 36-41. ISSN 1729-3774, eISSN 1729-4061. Available from: https://doi.org/10.15587/1729-4061.2014.24997 Go to original source...
    19. ZADACHYN, V., KONYUSHENKO, I. Numerical methods: textbook (in Ukrainian). Kharkiv, 2014. ISBN 978-966-676-547-6.
    20. SHVABYUK, V. Resistance of materials: Textbook (in Ukrainian). Kyiv: Znannia (Knowledge), 2016. ISBN 978-617-07-0306-4.
    21. PANCHENKO, S., GERLICI, J., VATULIA, G., LOVSKA, A., RYBIN, A., KRAVCHENKO, O. Strength assessment of an improved design of a tank container under operating conditions. Communication - Scientific Letters of the University of Zilina [online]. 2023, 25(3), p. B186-B193. ISSN 1335-4205, eISSN 2585-7878. Available from: https://doi.org/10.26552/com.C.2023.047 Go to original source...
    22. PANCHENKO, S., VATULIA, G., LOVSKA, A, RAVLYUK, V., ELYAZOV, I., HUSEYNOV, I. Influence of structural solutions of an improved brake cylinder of a freight car of railway transport on its load in operation. Eureka: Physics and Engineering [online]. 2022, 6, p. 45-55. ISSN 2461-4254, eISSN 2461-4262. Available from: https://doi.org/10.21303/2461-4262.2022.002638 Go to original source...

    This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content