Communications - Scientific Letters of the University of Zilina 2024, 26(4):B260-B269 | DOI: 10.26552/com.C.2024.051

Technological Properties of Cylinder Liners of Automotive Internal Combustion Engines Restored by Centrifugal Induction Sintering

Khasan Ilyamov1, Zhandos Zhumagulov ORCID...1, Erbol Sarkynov ORCID...1, Shamil Abdreshov ORCID...2, Gabit Bakyt ORCID...2, *, Yerzhigit Saparbayev1
1 Kazakh National Agrarian Research University, Almaty, Kazakhstan
2 Mukhametzhan Tynyshpayev ALT University, Almaty, Kazakhstan

Cylinder liners of an automotive internal combustion engine are subject to significant losses during operation. Severe operating conditions of cylinder liners lead to the appearance of various defects that must be eliminated to ensure the performance of the internal combustion engine. Currently, several methods have been developed for restoring and strengthening the inner surface of cylinder liners of automobile and tractor engines. Analyzing the considered methods for strengthening and restoring cylinder liners, their advantages and disadvantages from the point of view of increasing their durability, it can be assumed that the high-quality restoration of cylinder liners will be provided by a method of applying a coating by centrifugal induction sintering of powder material. Self-fluxing powders were used as baked powder material.

Keywords: sleeve cylinder, NI-resist inserts, tinned and chrome rings, micro-contact setting, metal contacting, centrifugal induction sintering cylinder -piston group
Grants and funding:

The authors received no financial support for the research, authorship and/or publication of this article.

Conflicts of interest:

The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

Received: April 3, 2024; Accepted: July 18, 2024; Prepublished online: August 26, 2024; Published: October 1, 2024  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Ilyamov, K., Zhumagulov, Z., Sarkynov, E., Abdreshov, S., Bakyt, G., & Saparbayev, Y. (2024). Technological Properties of Cylinder Liners of Automotive Internal Combustion Engines Restored by Centrifugal Induction Sintering. Communications - Scientific Letters of the University of Zilina, 26(4), B260-269. doi: 10.26552/com.C.2024.051
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. FU, X., WANG, B., TANG, X., JI, H., ZHU, X. Study on induction heating of workpiece before gear rolling process with different coil structures. Applied Thermal Engineering [online]. 2017, 114, p. 1-9. ISSN 1359-4311, eISSN 1873-5606. Available from: https://doi.org/10.1016/j.applthermaleng.2016.11.192 Go to original source...
    2. BASHIROV, R. J., AMIROV, F. G. Method for determining the thermal state of the cylinder sleeve during centrifugal induction sintering. BMSTU Journal of Mechanical Engineering [online]. 2022, 8(749), p. 33-41. ISSN 0536-1044, eISSN 2411-7196. Available from: https://doi.org/10.18698/0536-1044-2022-8-33-41 Go to original source...
    3. WOS, P., MICHALSKI, J. Effect of initial cylinder liner honing surface roughness on aircraft piston engine performances. Tribology Letters [online]. 2011, 41, p. 555-567. ISSN 1023-8883, eISSN 1573-2711. Available from: https://doi.org/10.1007/S11249-010-9733-Y Go to original source...
    4. MUSSABEKOV, M. O., BAKYT, G. B., OMIRBEK, A. M., BRUMERCIKOVA, E., BUKOVA, B. Shunting locomotives fuel and power resources decrease. MATEC Web of Conferences [online]. 2017, 134, 00041. eISSN 2261-236X. Available from: https://doi.org/10.1051/matecconf/201713400041 Go to original source...
    5. SETYAWATI, R. B., STULASTI, K. N. R., AZINUDDIN, Y. R., SUCI, W. G., ALIWARGA, H. K. (KIWI), DYARTANTI, E. R., PURWANTO, A. High power and thermal-stable of graphene modified LiNi0.8Mn0.1Co0.1O2 cathode by simple method for fast charging-enable lithium ion battery. Results in Engineering [online]. 2024, 21, 101651. eISSN 2590-1230. Available from: https://doi.org/10.1016/j.rineng.2023.101651 Go to original source...
    6. PRIEST, M., TAYLOR, C. M. Automobile engine tribology - approaching the surface. Wear [online]. 2000, 241(2), p. 193-203. ISSN 0043-1648, eISSN 1873-2577. Available from: https://doi.org/10.1016/S0043-1648(00)00375-6 Go to original source...
    7. MYAGKOV, L. L., SIVACHEV, V. M. Methods for determining the thermal state of medium-speed diesel engines taking into account boiling of the coolant. BMSTU Journal of Mechanical Engineering [online]. 2020, 7(724), p. 22-28. ISSN 0536-1044, eISSN 2411-7196. Available from: http://doi.org/10.18698/0536-1044-2020-7-22-28 Go to original source...
    8. TULENOV, A., BAUBEKOV, Y., BAKYT, G., BEKBOLATOV, G., TANSHANLO, M. Methodology for assessing the level of development and efficiency of the functioning of the traffic management system, taking into account the environmental factor. Vibroengineering Procedia [online]. 2024, 54, p. 300-307. ISSN 2345-0533, eISSN 2538-8479. Available from: https://doi.org/10.21595/vp.2024.24066 Go to original source...
    9. LIU, S., SHI, H., FENG, L. Transformer harmonic loss model considering skin effect and proximity effect. Dianli Zidonghua Shebei / Electric Power Automation Equipment [online]. 2015, 35(3), p. 133-139. ISSN 1006-6047. Available from: http://doi.org/10.16081/j.issn.1006-6047.2015.03.021 Go to original source...
    10. GRABON, W., PAWLUS, P., WOS, S., KOSZELA, W., WIECZOROWSKI, M. Evolutions of cylinder liner surface texture and tribological performance of piston ring-liner assembly. Tribology International [online]. 2018, 127, p. 545-556. ISSN 0301-679X, eISSN 1879-2464. Available from: https://doi.org/10.1016/j.triboint.2018.07.011 Go to original source...
    11. BAKYT, G., JAILAUBEKOV, Y., ABDULLAYEV, S., ASHIRBAYEV, G., ASHIRBAYEVA, I. Assessment of carbon dioxide emissions in road transport, using exhaust gas cleaning technology, in the Republic of Kazakhstan, Vibroengineering Procedia [online]. 2023, 48, p. 87-92. ISSN 2345-0533, eISSN 2538-8479. Available from: https://doi.org/10.21595/vp.2023.23163 Go to original source...
    12. CODREAN, M., CODREAN, M., NOVAC, M. C., NOVAC, O.-C., GORDAN, C., FARCAS, V. I. Analyzing the process of tempering a semifinished product using the FLUX2D and FEMM software. In: 2019 15th International Conference on Engineering of Modern Electric Systems EMES: proceedings [online]. IEEE. 2019. eISBN 978-1-7281-0773-8. Available from: https://doi.org/10.1109/EMES.2019.8795169 Go to original source...
    13. DOYON, G., RUDNEV, V., RUSSELL, C., MAHER, J. Revolution not evolution-necessary to advance induction heat treating. Advance Materials and Processes [online]. 2017, 175(6), p. 72-80. ISSN 0882-7958. Available from: https://doi.org/10.31399/asm.amp.2017-06.p072 Go to original source...
    14. ABDULLAYEVA, A., KALABAYEVA, A., IVANOV, A., ABDULLAYEV, S., BAKYT, G. Methods for identification of complex industrial control objects on their accelerating characteristics. Communications - Scientific Letters of the University of Zilina [online]. 2022, 24(3), p. B239-B246. ISSN 1335-4205, eISSN 2585-7878. Available from: https://doi.org/10.26552/com.C.2022.3.B239-B246 Go to original source...
    15. PARK, H.-S. DANG, X.-P. Multiobjective optimization of the heating process for forging automotive crankshaft. Journal of Manufacturing Science and Engineering [online]. 2015, 137(3), 031011. ISSN 1087-1357, eISSN 1528-8935. Available from: https://doi.org/10.1115/1.4029805 Go to original source...
    16. XUN, W., JIE, Z., QIANG, L. Multi-objective optimization of medium frequency induction heating process for large diameter pipe bending. Procedia Engineering [online]. 2014, 81, p. 2255-2260. ISSN 1877-7058. Available from: https://doi.org/10.1016/j.proeng.2014.10.317 Go to original source...

    This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content