Communications - Scientific Letters of the University of Zilina 2025, 27(3):B170-B185 | DOI: 10.26552/com.C.2025.035

Justification of the Possibility for Extending the Service Life of Cast Parts of a Three-Axle Bogie Based on Results of the Running Strength Tests to Determine Their Loading

Rustam Rahimov ORCID...*, Diyor Zafarov ORCID...
Faculty of Railway Transport Engineering, Tashkent State Transport University, Tashkent, Republic of Uzbekistan

The article presents the results of research aimed at assessing the residual life and the possibility of extending the service life of cast parts of a UVZ-9M three-axle bogie used in six-axle scale test wagons. The tests have shown that the maximum stresses in the most stressed areas of the side frame, spring and pivot beams are within acceptable values, which indicates the presence of a residual life. The analysis of safety margin coefficients confirmed that the bogie elements have a significant reserve of operational characteristics. Calculations of the full service life of cast parts, performed based on the experimental data, demonstrated a sufficient residual life to prolong their use. It has been scientifically and experimentally proven that the cast parts of the UVZ-9M three-axle bogie can be safely operated for 5 years.

Keywords: scale test wagon, three-axle bogie, cast parts, stress, residual life, running strength test, safety margin
Grants and funding:

The authors received no financial support for the research, authorship and/or publication of this article.

Conflicts of interest:

The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

Received: January 20, 2025; Accepted: March 22, 2025; Prepublished online: April 16, 2025; Published: July 1, 2025  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Rahimov, R., & Zafarov, D. (2025). Justification of the Possibility for Extending the Service Life of Cast Parts of a Three-Axle Bogie Based on Results of the Running Strength Tests to Determine Their Loading. Communications - Scientific Letters of the University of Zilina27(3), B170-185. doi: 10.26552/com.C.2025.035
Download citation

References

  1. RAHIMDE, M., GHODRATI, B., TAGHIZADEH VAHED, A. Prediction of mining railcar remaining useful life. In: 28th International Symposium on Mine Planning and Equipment Selection MPES 2019: proceedings [online]. 2020. ISBN 978-3-030-33954-8, p. 281-288. Available from: https://doi.org/10.1007/978-3-030-33954-8_35 Go to original source...
  2. LI, Z., HE, Q. Prediction of railcar remaining useful life by multiple data source fusion. IEEE Transactions on Intelligent Transportation Systems [online]. 2015, 16(4), p. 2226-2235. eISSN 1558-0016. Available from: https://doi.org/10.1109/TITS.2015.2400424 Go to original source...
  3. XU, Z. W., WU, S. C., WANG, X. S. Fatigue evaluation for high-speed railway axles with surface scratch. International Journal of Fatigue [online]. 2019, 123, p. 79-86. ISSN 0142-1123. Available from: https://doi.org/10.1016/j.ijfatigue.2019.02.016 Go to original source...
  4. WU, S. C., LIU, Y. X., LI, C. H., KANG, G. Z., LIANG, S. L. On the fatigue performance and residual life of intercity railway axles with inside axle boxes. Engineering Fracture Mechanics [online]. 2018, 197, p. 176-191. ISSN 0013-7944. Available from: https://doi.org/10.1016/j.engfracmech.2018.04.046 Go to original source...
  5. FOMIN, O., VATULIA, G., HORBUNOV, M., LOVSKA, A., PISTEK, V., KUCERA, P. Determination of residual resource of flat wagons load-bearing structures with a 25-year service life. IOP Conference Series: Materials Science and Engineering [online]. 2021, 1021(1), ISSN 1757-899X. Available from: https://doi.org/10.1088/1757-899X/1021/1/012005 Go to original source...
  6. SYGANSKAYA, L., HAMRAEVA, E., NARKIZOVA, E. Testing the methodology for justifying the service life of freight cars based on the results of analog car testing. Bulletin of Scientific Research Results [online]. 2024, 2024(4), p. 15-23. ISSN 2223-9987. Available from: https://doi.org/10.20295/2223-9987-2024-04-15-23 Go to original source...
  7. LUO, Y., LI, C., KANG, X., HU, Y., WU, S. Fatigue limit and residual life evaluation of railway EA4T axles with artificial surface impacts. Journal of Materials Engineering and Performance [online]. 2023, 32, p. 5167-5175. eISSN 1544-1024. Available from: https://doi.org/10.1007/s11665-022-07447-3 Go to original source...
  8. REN, X., WU, S., XING, H., FANG, X., AO, N., ZHU, T., LI, Q., KANG, G. Fracture mechanics based residual life prediction of railway heavy coupler with measured load spectrum. International Journal of Fracture [online]. 2022, 234, p. 313-327. eISSN 1573-2673. Available from: https://doi.org/10.1007/s10704-022-00627-1 Go to original source...
  9. WANG, C., ZHU, T., YANG, B., XIAO, S., YANG, G. Remaining useful life for heavy-duty railway cast steel knuckles based on crack growth behavior with hypothetical distributions. Chinese Journal of Mechanical Engineering [online]. 2024, 37, 77. ISSN 2192-8258. Available from: https://doi.org/10.1186/s10033-024-01052-2 Go to original source...
  10. ORLOVA, A. M., BABANIN, V. S., TURUTIN I. V. Calculation justification of the assigned service life of the finished axle of a freight wagon wheelset. Railway Technique. 2023, 1(61), p. 22-26. ISSN 1998-9318.
  11. ELYAZOV, I. S., YUSIFZADE, E. N., BAKHSHIEV, A. B., HUSEYNOV, I. D. Method for calculating the durability of a car wheelset. Bulletin of RGUPS. 2024, 3(95), p. 109-118. ISSN 0201-727X.
  12. ZAFAROV, D. Development of a methodology for conducting running strength tests to determine the load of cast parts of a three-axle bogie. Railway Transport: Topical Issues and Innovations. 2023, 4, p. 165-171. ISSN 2181-953X.
  13. BORONENKO, Y., RAHIMOV, R. Experimental determination of forces through measurements of strains in the side frame of the bogie. Transport Problems [online]. 2021, 16(3), p. 199-211. ISNN 1896-0596. Available from: https://doi.org/10.21307/tp-2021-053 Go to original source...
  14. State standard 33788-2016. Freight and passenger wagons. Strength and dynamic quality testing methods. Standartinform. 2016.
  15. Norms for the calculation and design of wagons, railways of the MPS track gauge 1520 mm (non-self-propelled) with amendments and additions. GosNIIV-VNIIIZHT. Moscow, 1996.

This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.