Communications - Scientific Letters of the University of Zilina 2002, 4(1):83-87 | DOI: 10.26552/com.C.2002.1-2.83-87
Geometric Relations of the Formation of a Cut Surface
- 1 Fakulta vyrobnych technologii, TU v Kosiciach, so sidlom v Presove, Slovakia
When assessing the roughness of the cut surface a simplified relationship is used representing the dependency of maximum deviation of a roughness and a representing feed in the form Rz 8 f r 2 , where Rz is the roughness of the cut surface, f is a feed and r is a radius of the curving of the knife. The latest approaches illustrate the inaccuracy of this dependency. On the basis of the experimental measurements the authors analyse new relationships between cutting conditions and roughness of the cut surface. These enable to predict morfology of the cut surface to the accession of the semi-product in the production facilities and to select optimal cut conditions of the aspect of the required quality of the surface.
Keywords: no keywords
Published: June 30, 2002 Show citation
References
- BUMBÁLEK, B., ODVODY, V., OŠŤÁDAL, B: Drsnost povrchu. Praha SNTL, 1989, 338 s.
- GRZESIK, W.: Podstawy skrawania materialów metalowych. Warszawa: Wydawnictwa Naukowo-Techniczne1998, 380 s.
- KALPELJAN, S.: Manufacturing Engineering and Technology. Addison-Wesley Publiching Company. USA 1989, 1199 s.
- MIKO, E.: Monitoring of the microroughness of surfaces face-milled with round ceramic blades. In: Sience Report: Geometrical Surface Structure of Machine Parts. CEEPUS PL-1, Kielce, 2001, s.137-146.
- VASILKO, K., MACUROVÁ, A., VASILKOVÁ, D.: Nová metóda na zlepšenie drsnosti obrobeného povrchu pri pri sústružení. Acta Mechanica Slovaca 2/1999,s. 17-30
This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.