Communications - Scientific Letters of the University of Zilina 2018, 20(3):55-60 | DOI: 10.26552/com.C.2018.3.55-60

Design of CNC Device Designed for Automation of the Application of Viscous Materials

Peter Drgona1, Rastislav Stefun1, Lubomir Stefke2
1 Department of mechatronics and electronics, Faculty of electrical engineering, University of Zilina, Slovakia
2 Bel Power Solutions, Dubnica nad Vahom, Slovakia

This article deals with the design and practical realization of a CNC device designed for the application of viscous materials, such as a thermal conducting paste. Nowadays, growing trend of usage of electronic circuits in transportation systems is observed. Switched mode power supplies are widely used in all types of means of transport and their infrastructure. For correct operation of power converters, produced heat must be dissipated. Thermal conducting paste is used for better heat dissipating but its application on surface can be an issue. Designed CNC device serves for easier and more accurate application in production process in transport industry.

Keywords: automation in transportation system; CNC design; CNC control; ball screw; stepper motor

Received: April 11, 2018; Accepted: May 10, 2018; Published: September 30, 2018  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Drgona, P., Stefun, R., & Stefke, L. (2018). Design of CNC Device Designed for Automation of the Application of Viscous Materials. Communications - Scientific Letters of the University of Zilina, 20(3), 55-60. doi: 10.26552/com.C.2018.3.55-60
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. STEFANEC, P., PASKALA, M., DOBRUCKY, B., SUSLIK, B.: Control System for Preheating of Molds with using PLC. Proceedings of International Conference on Industrial Technology and Management Science (ITMS 2015), China, book series: ACSR-Advances in Comptuer Science Research, 34, 1647-1652, 2015.
    2. DUCHON, F., HUBINSKY, P., HANZEL, J., BABINEC, A., TOLGYESSY, M.: Intelligent Vehicles as the Robotic Applications. Proceedings of 5th International Conference on Modelling of Mechanical and Mechatronics Systems (MMaMS 2012), Slovakia, book series: Procedia Engineering, 48, 105-114, 2012. Go to original source...
    3. Online. Available: http://www.cnc1.eu/sk/KompasH1000GSKIT.htm [accessed 2017-03-11].
    4. Online. Avialable: http://www.thomsonlinear.com/downloads/screws/Leadscrews_Ballscrews_Splines_cten.pdf [accessed 2017-04-14].
    5. URICA, T., SIMONOVA, A., KASCAK, S.: Control Design and Simulation of Continuous Systems. Proceedings of IEEE 18th International Scientific Conference Electric Power Engineering (EPE 2017), Czech Republic, USB key, 125-129, 2017. Go to original source...
    6. FEDAK, V., DUROVSKY, F., UVEGES, R., KYSLAN, K., LACKO, M.: HIL Simulator of Drives of an Industrial Robot with 6 DOF. Elektronika ir Elektrotechnika, 21(2), 14-19, 2015. Go to original source...
    7. Online. Available: http://www.linearmotiontips.com/calculate-motor-drive-torque-ball-screws/ [accessed 2017-05-10].
    8. Online. Available: http://microcon.cz/ [accessed 2017-05-10].
    9. TEREN, A., SPANIK, P., FENO, I.: DC/DC Converters with Soft (ZVS) Switching. Proceedings of International Conference ELEKTRO 2001, Slovakia, 82-87, 2001.
    10. SIMONOVA, A., HARGAS, L., KONIAR, D., LONCOVA, Z. HRIANKA, M.: Mathematical Analysis of Complete Operation Cycle of a System with Two-Position Controller. Proceedings of IEEE 11th International Conference ELEKTRO 2016, Slovakia, CD-ROM, 213-215, 2016. Go to original source...
    11. Toshiba, Datasheet TB6600 [online]. Available: www.toshiba.com.
    12. HOCK, O., DRGONA, P., PASKALA, M.: Simulation Model of Adjustable Arm Using Denavit-Hartenberg Parameters. Proceedings of 10th International Conference ELEKTRO 2014, Slovakia, 176-179, 2014. Go to original source...

    This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content