Communications - Scientific Letters of the University of Zilina 2022, 24(3):B170-B188 | DOI: 10.26552/com.C.2022.3.B170-B188

Analysis of Influence of the Load Plane Combined with Preload on Durability of Bearing

Jaroslaw Kaczor ORCID...
Institute of Sanitary Engineering and Building Installations, Technical University of Lodz, Lodz, Poland

Angular ball bearings are commonly used whenever there is a demand to increase stiffness of a bearing. The aforementioned increase of stiffness can be achieved by obtaining proper preload in bearings. In common belief, preload has a negative consequence: it increases the load of rolling elements, which must lead to lower durability of bearing compared to the situation before the preload use.

Keywords: angular ball bearings, preload, durability of bearing, bearing life

Received: October 27, 2021; Accepted: February 2, 2022; Prepublished online: April 5, 2022; Published: July 1, 2022  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Kaczor, J. (2022). Analysis of Influence of the Load Plane Combined with Preload on Durability of Bearing. Communications - Scientific Letters of the University of Zilina, 24(3), B170-188. doi: 10.26552/com.C.2022.3.B170-B188
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. AQUIRREBEITIA, J., PLAZA, J., ABASOLO, M., VALLEJO, J. Effect of the preload in the general static load-carrying capacity of four-contact-point slewing bearings for wind turbine generators: theoretical model and finite element calculations. Wind Energy [online]. 2014, 17(10), p. 1605-1621. eISSN 1099-1824. Available from: https://doi.org/10.1002/we.1656 Go to original source...
    2. CHOI, CH.-H., LEE, CH.-M. A variable preload device using liquid pressure for machine tools spindles. International Journal of Precision Engineering and Manufacturing [online]. 2012, 13, p. 1009-1012. ISSN 2234-7593, eISSN 2005-4602. Available from: https://doi.org/10.1007/s12541-012-0131-2 Go to original source...
    3. BAI, CH., ZHANG, H., XU, Q. Effects of axial preload of ball bearing on the nonlinear dynamic characteristics of a rotor-bearing system. An International Journal of Nonlinear Dynamics and Chaos in Engineering Systems [online]. 2008, 53(3), p. 173-190. ISSN 0924-090X, eISSN 1573-269X. Available from: https://doi.org/10.1007/s11071-007-9306-2 Go to original source...
    4. CAO, H., HOLKUP, T., ALTINTAS, Y. A comparative study on the dynamics of high speed spindles with respect to different preload mechanisms. The International Journal of Advanced Manufacturing Technology [online]. 2011, 57(9), p. 871-883. ISSN 0268-3768, eISSN 1433-3015. Available from: https://doi.org/10.1007/s00170-011-3356-9 Go to original source...
    5. CHEHG, H., ZHANG, Y., LU, W., YANG, Z. Research on the effect of structural and material parameters on vibrations based on quasi-static model of bearings. Journal of the Brazilian Society of Mechanical Sciences and Engineering [online]. 2020, 42(11), 578. ISSN 1678-5878, eISSN 1806-3691. Available from: https://doi.org/10.1007/s40430-020-02659-x Go to original source...
    6. GAOFENG, H., WEIGUO, G., YE, CH., DAWEI, Z., YANLING, T., XIANGYANG, Q., HONGIJE, Z. An experimental study on the rotational accuracy of variable preload spindle-bearing system. Advances in Mechanical Engineering [online]. 2018, 10(5), p. 1-14. ISSN 1687-8132, eISSN 1687-8140. Available from: https://doi.org/10.1177/1687814018776171 Go to original source...
    7. GU, J., ZHANG, Y., LIU, H. Influences of wear on dynamic characteristics of angular contact ball bearings. Meccanica [online]. 2019, 54(7), p. 945-965. ISSN 0025-6455, eISSN 1572-9648. Available from: https://doi.org/10.1007/s11012-019-00996-3 Go to original source...
    8. HU, G., ZHANG, D., GAO, W., CHEN, Y., LIU, T., TIAN, Y. Study on variable pressure/position preload spindle-bearing system by using piezoelectric actuators under close-loop control. International Journal of Machine Tools and Manufacture [online]. 2017, 125, p. 68-88. ISSN 0890-6955. Available from: https://doi.org/10.1016/j.ijmachtools.2017.11.004 Go to original source...
    9. HUNG, J.-P., LAI, Y.-L., LUO, T.-L., SU, H.-CH. Analysis of the machining stability of a milling machine considering the effect of machine frame structure and spindle bearings: experimental and finite element approaches. The International Journal of Advanced Manufacturing Technology [online]. 2013, 68(9-12), p. 2393-2405. ISSN 0268-3768, eISSN 1433-3015. Available from: https://doi.org/10.1007/s00170-013-4848-6 Go to original source...
    10. HWANG, Y.-K., LEE, CH.-M. A review on the preload technology of the rolling bearing for the spindle of machine tools. International Journal of Precision Engineering and Manufacturing [online]. 2010, 11(3), p. 491-498. ISSN 2234-7593, eISSN 2005-4602. Available from: https://doi.org/10.1007/s12541-010-0058-4 Go to original source...
    11. SIM, K., LEE, Y.-B., KIM, T. Effects of mechanical preload and bearing clearance on rotor dynamic performance of lobed gas foil bearings for oil-free turbochargers. Tribology Transactions [online]. 2013, 56(2), p. 224-235. ISSN 1040-2004, eISSN 1547-397X. Available from: https://doi.org/10.1080/10402004.2012.737502 Go to original source...
    12. HWAN, Y.-K., LEE, CH.-M. Development of a simple determination method of variable preloads for high speed spindles in machine tools. International Journal of Precision Engineering and Manufacturing [online]. 2015, 16(1), p. 127-134. ISSN 2234-7593, eISSN 2005-4602. Available from: https://doi.org/ 10.1007/s12541-015-0016-2 Go to original source...
    13. KIM, D. H., LEE, CH. M. A study on the development of a new conceptual automatic variable preload system for a spindle bearing. The International Journal of Advanced Manufacturing Technology [online]. 2013, 65, p. 817-824. ISSN 0268-3768, eISSN 1433-3015. Available from: https://doi.org/10.1007/s00170-012-4219-8 Go to original source...
    14. ZHANG, J., FANG, B., ZHU, Y., HONG, J. A comparative study and stiffness analysis of angular contact ball bearings under different preload mechanisms. Mechanism and Machine Theory [online]. 2017, 115, p. 1-17. ISSN 0094-114X. Available from: https://doi.org/10.1016/j.mechmachtheory.2017.03.012 Go to original source...
    15. LI, J., ZHU, Y., YAN, K., YAN, X., LIU, Y., HONG, J. Research on the axial stiffness softening and hardening characteristics of machine tool spindle system. International Journal of Advanced Manufacturing Technology [online]. 2018, 99, p. 951-963. ISSN 0268-3768, eISSN 1433-3015. Available from: https://doi.org/10.1007/s00170-018-2456-1 Go to original source...
    16. KACZOR, J., RACZYNSKI, A.The effect of preload of angular contact ball bearings on durability of bearing system. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology [online]. 2015, 229(6), p. 723-732. ISSN 1350-6501, eISSN 2041-305X. Available from: https://doi.org/10.1177/1350650114562485 Go to original source...
    17. KACZOR, J., RACZYNSKI, A. The selection of preload in angular contact ball bearings according to the durability criterion. Tribologia [online]. 2018, 1(277), p. 25-34. ISSN 0208-7774, eISSN 1732-422X. Available from: https://doi.org/10.5604/01.3001.0011.8284 Go to original source...
    18. HARRIS, T. A. Rolling bering analysis. London: John Wiley and Sons, 2006. ISBN 9780849381676.
    19. KACZOR, J. Analysis of the influence of shaft load on the value of acceptable preload in a system of angular ball bearings. Bimonthly Tribologia [online]. 2020, 290(2), p. 25-35. ISSN 0208-7774. Available from: https://doi.org/10.5604/01.3001.0014.3737 Go to original source...
    20. JANG, G. H, KIM, D. K., HAN, J. H., KIM, C. S. Analysis of dynamic characteristics of a HDD spindle system supported by ball bearing due to temperature variation. Microsystem Technologies [online]. 2003, 9, p. 243-249. ISSN 0946-7076, eISSN 1432-1858. Available from: https://doi.org/10.1007/s00542-002-0260-0 Go to original source...
    21. KACZOR, J., RACZYNSKI, A. The selection of preload in angular contact ball bearings according to the criterion of moment of friction. Tribologia [online]. 2018, 1(277), p. 35-44. ISSN 0208-7774, eISSN 1732-422X. Available from: https://doi.org/10.5604/01.3001.0011.8286 Go to original source...
    22. KACZOR, J., RACZYNSKI, A. The influence of preload on the work of angular contact ball bearings. Archive of Mechanical Engineering [online]. 2016, 63(3), p. 319-336. eISSN 2300-1895. Available from: https://doi.org/10.1515/meceng-2016-0018 Go to original source...
    23. MOHAMMED, A., ABDALLAH, A. Effects of axial preloading of angular contact ball bearings on the dynamics of a grinding machine spindle system. Journal of Materials Processing Technology [online]. 2003, 136(1-3), p. 48-59. ISSN 0924-0136. Available from: https://doi.org/10.1016/S0924-0136(02)00846-4 Go to original source...
    24. RACZYNSKI, A. The calculation method of deep groove ball bearings durability with regard to clearance and shaft. Scientific Problems of Machines Operation and Maintenance. 1999, 34(1), p. 111-120. ISSN 0137-5474.
    25. SKF catalog [online]. Available from: http://www.skf.com/group/products/bearings-units-housings/ball-bearings/angular-contact-ball-bearings/single-row-angular-contact-ball-bearings/single-row/index.html?designation=7212%20BEP
    26. LI, T., KOLAR, P., LI, X.-Y., WU, J. Research development of preload technology on angular contact ball bearing of high speed spindle. International Journal of Precision Engineering and Manufacturing [online]. 2020, 21(6), p. 1163-1185. ISSN 2234-7593, eISSN 2005-4602. Available from: https://doi.org/10.1007/s12541-019-00289-5 Go to original source...
    27. THAN, V., HUANG, J. H. Nonlinear thermal effects on high-speed spindle bearings subjected to preload. Tribology International [online]. 2015, 96, p. 361-372. ISSN 0301-679X. Available from: https://doi.org/10.1016/j.triboint.2015.12.029 Go to original source...
    28. TONG, V.-C., HWANG, J., SHIM, J., OH, J.-S., HONG, S.-W. Multi-objective optimization of machine tool spindle-bearing system. International Journal of Precision Engineering and Manufacturing [online]. 2020, 21(10), p. 1885-1902. ISSN 2234-7593, eISSN 2005-4602. Available from: https://doi.org/10.1007/s12541-020-00389-7 Go to original source...
    29. YAN, K.E., YAN, B., WANG, Y., HONG, J., ZHANG, J. Study on thermal induced preload of ball bearing with temperature compensation based on state observer approach. The International Journal of Advanced Manufacturing Technology [online]. 2016, 11, p. 3029-3040. ISSN 0268-3768, eISSN 1433-3015. Available from: https://doi.org/10.1007/s00170-016-9469-4 Go to original source...

    This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content